Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1995-09-01 → 1995-09-30 |
| MCL | Health-based | Resolved | 1995-09-01 → 1995-09-30 |
| MCL | Health-based | Resolved | 1995-09-01 → 1995-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 167.9 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 191 µg/L | 15/18 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.1 µg/L No EPA limit set | 14/14 | SYR4 | 2012–2019 |
| Chloroform | 6.185 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 14/14 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.705 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 14/14 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Xylenes, Total | 5.87 µg/L 0.1% of the EPA limit 10000 µg/L
worst single sample: 6.5 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.25 µg/L No EPA limit set
worst single sample: 4.6 µg/L | 6/6 | SYR4 | 2014–2019 |
| Ethylbenzene | 1.625 µg/L 0.2% of the EPA limit 700 µg/L
worst single sample: 1.7 µg/L | 6/8 | SYR4 | 2012–2019 |
| TTHM | 11 µg/L 14% of the EPA limit 80 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 6.025 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 6.2 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 1.57 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 4/6 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 4.155 pCi/L No EPA limit set
worst single sample: 4.2 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Lithium | 13.2 µg/L No EPA limit set | 2/2 | UCMR-5 | 2023 |
| Combined Radium (-226 And -228) | 0.2000 pCi/L 4% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2018 |
| Fluoride | 220 µg/L 5.5% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 1 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
64 contaminants tested, none detected
Frequently asked questions about Kings Village - Jcsa
Is Kings Village - Jcsa tap water safe to drink?
EPA monitoring detected 16 contaminants in Kings Village - Jcsa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kings Village - Jcsa's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Lead, and others. The full list with the level and data source for each is above.
How many people does Kings Village - Jcsa serve?
Kings Village - Jcsa reports serving 124 people, per its EPA record.
Has Kings Village - Jcsa had any water quality violations?
The EPA has 3 violations on file for Kings Village - Jcsa, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.