Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2018-10-02 |
| TT | Health-based | Resolved | 2018-10-02 |
| TT | Health-based | Resolved | 2018-10-02 |
| TT | Health-based | Resolved | 2018-10-02 |
| TT | Health-based | Resolved | 2018-10-02 |
| TT | Health-based | Resolved | 2018-10-02 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1200 µg/L 30% of the EPA limit 4000 µg/L
worst single sample: 1650 µg/L | 102/200 | SYR4 | 2012–2019 |
| Copper | 421.55 µg/L 32% of the EPA limit 1300 µg/L
worst single sample: 660 µg/L | 40/40 | SYR4 | 2014–2017 |
| Lead | 0.0015 mg/L 9.8% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Barium | 53.475 µg/L 2.7% of the EPA limit 2000 µg/L
worst single sample: 54 µg/L | 8/8 | SYR4 | 2014–2017 |
| Chloroform | 5.22 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 7/15 | SYR4 | 2013–2018 |
| TTHM | 11.294 µg/L 14% of the EPA limit 80 µg/L
worst single sample: 12.71 µg/L | 7/8 | SYR4 | 2013–2018 |
| Bromodichloromethane | 3.775 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 6/15 | SYR4 | 2013–2018 |
| Combined Radium (-226 And -228) | 3.1125 pCi/L 62% of the EPA limit 5 pCi/L
worst single sample: 3.2 pCi/L | 6/6 | SYR4 | 2014–2017 |
| Dibromochloromethane | 2.7 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 6/15 | SYR4 | 2013–2018 |
| Gross Alpha, Excl. Radon And U | 9.3525 pCi/L 62% of the EPA limit 15 pCi/L
worst single sample: 9.57 pCi/L | 6/6 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 5.375 pCi/L No EPA limit set
worst single sample: 5.98 pCi/L | 6/6 | SYR4 | 2014–2017 |
| Lead | 5.208 µg/L 35% of the EPA limit 15 µg/L
worst single sample: 5.26 µg/L | 5/40 | SYR4 | 2014–2017 |
| Bromoform | 0.6400 µg/L No EPA limit set | 1/15 | SYR4 | 2013–2018 |
| Dichloromethane | 0.2800 µg/L 5.6% of the EPA limit 5 µg/L | 1/15 | SYR4 | 2013–2018 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 1 µg/L 1.7% of the EPA limit 60 µg/L | 1/8 | SYR4 | 2013–2018 |
89 contaminants tested, none detected
Utility contact
Frequently asked questions about Milton Waterworks
Is Milton Waterworks tap water safe to drink?
EPA monitoring detected 16 contaminants in Milton Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Milton Waterworks's water?
EPA monitoring detected Fluoride, Copper, Lead, Barium, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Milton Waterworks serve?
Milton Waterworks reports serving 5,588 people in Wisconsin, per its EPA record.
Has Milton Waterworks had any water quality violations?
The EPA has 79 violations on file for Milton Waterworks, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.