Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1997-06-01 → 1997-06-30 |
| MCL | Health-based | Archived | 1997-06-01 → 1997-06-30 |
| MCL | Health-based | Archived | 1997-06-01 → 1997-06-30 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1995-08-01 → 1995-08-31 |
| MR | Monitoring | Unaddressed | 2023-01-01 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-12-31 |
| MON | Monitoring | Resolved | 2017-06-01 → 2017-06-30 |
| Other | Monitoring | Resolved | 2016-07-01 |
| Other | Monitoring | Resolved | 2015-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2645.5 µg/L 26% of the EPA limit 10000 µg/L
worst single sample: 2830 µg/L | 144/144 | SYR4 | 2012–2019 |
| TTHM | 6.417 µg/L 8% of the EPA limit 80 µg/L
worst single sample: 7.83 µg/L | 19/19 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.346 µg/L No EPA limit set
worst single sample: 3.17 µg/L | 17/49 | SYR4 | 2012–2019 |
| Bromoform | 2.03 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 13/49 | SYR4 | 2012–2019 |
| Lead | 0.0208 mg/L 139% above the EPA limit of 0.0150 mg/L | 13/13 | LCR | 2025 |
| Arsenic | 4.845 µg/L 48% of the EPA limit 10 µg/L
worst single sample: 5.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Barium | 69.7 µg/L 3.5% of the EPA limit 2000 µg/L
worst single sample: 71.7 µg/L | 11/11 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.925 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 11/49 | SYR4 | 2012–2019 |
| Chloroform | 1.185 µg/L No EPA limit set
worst single sample: 1.39 µg/L | 11/49 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2625 µg/L 26% of the EPA limit 10000 µg/L
worst single sample: 2650 µg/L | 11/11 | SYR4 | 2012–2019 |
| Copper | 10.487 µg/L 0.8% of the EPA limit 1300 µg/L
worst single sample: 11.5 µg/L | 3/11 | SYR4 | 2012–2019 |
| Chromium | 1 µg/L 1% of the EPA limit 100 µg/L | 1/11 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/1 | SYR4 | 2012 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Vera Water & Power
Is Vera Water & Power tap water safe to drink?
EPA monitoring detected 13 contaminants in Vera Water & Power's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Vera Water & Power's water?
EPA monitoring detected Nitrate, TTHM, Dibromochloromethane, Bromoform, Lead, and others. The full list with the level and data source for each is above.
How many people does Vera Water & Power serve?
Vera Water & Power reports serving 24,692 people in Washington, per its EPA record.
Has Vera Water & Power had any water quality violations?
The EPA has 67 violations on file for Vera Water & Power, of which 5 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.