Tap WaterIndex

← Washington

Tap water quality report

Baby Island Heights Water Assoc

EPA monitoring tested this supplier for 74 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

74
contaminants tested
16
detected
211
people served
1
health-based violations
Washington rankingsLead in WashingtonPFAS in Washington
Water source
Ground water
Ownership
Private
Counties served
Island

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

1
health-based violations
17
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1982-12-01 → 1983-09-30
MR Monitoring Resolved 2020-01-01 → 2022-12-31
MR Monitoring Resolved 2020-01-01 → 2022-12-31
Other Monitoring Resolved 2016-07-01
Other Monitoring Resolved 2014-07-01
MR Monitoring Resolved 2007-01-01
MR Monitoring Resolved 2007-01-01
MR Monitoring Resolved 2007-01-01
MR Monitoring Resolved 2007-01-01
MR Monitoring Resolved 2007-01-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
5390 µg/L 54%
of the EPA limit 10000 µg/L
worst single sample: 5590 µg/L
44/46 SYR4 2012–2019
Lead
0.00090 mg/L 6%
of the EPA limit 0.0150 mg/L
 12/12 LCR 2025
Chloroform
1.77 µg/L
No EPA limit set
worst single sample: 1.8 µg/L
7/10 SYR4 2013–2019
TTHM
27.073 µg/L 34%
of the EPA limit 80 µg/L
worst single sample: 27.49 µg/L
7/7 SYR4 2013–2019
Arsenic
6.75 µg/L 68%
of the EPA limit 10 µg/L
worst single sample: 7 µg/L
6/6 SYR4 2012–2018
Bromodichloromethane
6 µg/L
No EPA limit set
worst single sample: 6.1 µg/L
6/10 SYR4 2013–2019
Bromoform
10.45 µg/L
No EPA limit set
worst single sample: 10.8 µg/L
6/10 SYR4 2013–2019
Dibromochloromethane
12.2225 µg/L
No EPA limit set
worst single sample: 12.5 µg/L
6/10 SYR4 2013–2019
Nitrate-Nitrite
4627.5 µg/L 46%
of the EPA limit 10000 µg/L
worst single sample: 4800 µg/L
6/6 SYR4 2012–2018
Fluoride
422 µg/L 11%
of the EPA limit 4000 µg/L
worst single sample: 450 µg/L
3/6 SYR4 2012–2018
Barium
23.5 µg/L 1.2%
of the EPA limit 2000 µg/L
worst single sample: 24 µg/L
2/6 SYR4 2012–2018
Chromium
6.8 µg/L 6.8%
of the EPA limit 100 µg/L
worst single sample: 7 µg/L
2/6 SYR4 2012–2018
Gross Beta Particle Activity
2.4705 pCi/L
No EPA limit set
worst single sample: 2.48 pCi/L
2/3 SYR4 2013–2017
Dibromoacetic Acid
2.1 µg/L
No EPA limit set
 1/4 SYR4 2013–2018
Total Haloacetic Acids (HAA5)
3.2 µg/L 5.3%
of the EPA limit 60 µg/L
 1/4 SYR4 2013–2018
Trichloroacetic Acid
1.1 µg/L
No EPA limit set
 1/4 SYR4 2013–2018
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCopperCyanideCadmiumCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitritePentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
Beth Herrild

Frequently asked questions about Baby Island Heights Water Assoc

Is Baby Island Heights Water Assoc tap water safe to drink?

EPA monitoring detected 16 contaminants in Baby Island Heights Water Assoc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Baby Island Heights Water Assoc's water?

EPA monitoring detected Nitrate, Lead, Chloroform, TTHM, Arsenic, and others. The full list with the level and data source for each is above.

How many people does Baby Island Heights Water Assoc serve?

Baby Island Heights Water Assoc reports serving 211 people in Washington, per its EPA record.

Has Baby Island Heights Water Assoc had any water quality violations?

The EPA has 17 violations on file for Baby Island Heights Water Assoc, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.