Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2019-01-01 → 2019-03-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 6.145 µg/L No EPA limit set
worst single sample: 7.1 µg/L | 40/40 | SYR4 | 2012–2019 |
| Chloroform | 86.25 µg/L No EPA limit set
worst single sample: 107 µg/L | 40/40 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.45 µg/L No EPA limit set
worst single sample: 33 µg/L | 32/32 | SYR4 | 2012–2019 |
| TTHM | 94.745 µg/L 118% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 114 µg/L | 32/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 75.35 µg/L 126% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 84 µg/L | 32/32 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 36.45 µg/L No EPA limit set
worst single sample: 37 µg/L | 32/32 | SYR4 | 2012–2019 |
| Copper | 682 µg/L 52% of the EPA limit 1300 µg/L
worst single sample: 830 µg/L | 29/39 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 12.95 µg/L No EPA limit set
worst single sample: 16 µg/L | 28/32 | SYR4 | 2012–2019 |
| Lead | 8 µg/L 53% of the EPA limit 15 µg/L | 18/39 | SYR4 | 2012–2019 |
| Hexachlorocyclopentadiene | 0.2320 µg/L 0.5% of the EPA limit 50 µg/L
worst single sample: 0.2500 µg/L | 13/31 | SYR4 | 2012–2019 |
| Lead | 0.0034 mg/L 23% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Atrazine | 0.1480 µg/L 4.9% of the EPA limit 3 µg/L
worst single sample: 0.1600 µg/L | 9/31 | SYR4 | 2012–2019 |
| Asbestos | 2 MFL 29% of the EPA limit 7 MFL | 1/1 | SYR4 | 2013 |
| Methoxychlor | 0.1000 µg/L 0.3% of the EPA limit 40 µg/L | 1/30 | SYR4 | 2012–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about South Hero Fire District 4
Is South Hero Fire District 4 tap water safe to drink?
EPA monitoring detected 14 contaminants in South Hero Fire District 4's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in South Hero Fire District 4's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does South Hero Fire District 4 serve?
South Hero Fire District 4 reports serving 760 people in Vermont, per its EPA record.
Has South Hero Fire District 4 had any water quality violations?
The EPA has 420 violations on file for South Hero Fire District 4, of which 62 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.