Tap WaterIndex

← Virginia

Tap water quality report

Kenbridge, Town of

EPA monitoring tested this supplier for 76 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

76
contaminants tested
16
detected
1,400
people served
24
health-based violations
Virginia rankingsLead in VirginiaPFAS in Virginia
Water source
Surface water
Ownership
Local government
Counties served
Lunenburg

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

24
health-based violations
31
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2008-04-01 → 2008-06-30
MCL Health-based Resolved 2008-04-01 → 2008-06-30
MCL Health-based Resolved 2008-04-01 → 2008-06-30
MCL Health-based Resolved 2008-04-01 → 2008-06-30
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2006-10-01 → 2006-12-31
MCL Health-based Resolved 2006-10-01 → 2006-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
6.3 µg/L
No EPA limit set
worst single sample: 7.7 µg/L
40/40 SYR4 2012–2019
Chloroform
54.3 µg/L
No EPA limit set
worst single sample: 76 µg/L
40/40 SYR4 2012–2019
Dichloroacetic Acid
20.45 µg/L
No EPA limit set
worst single sample: 26 µg/L
32/32 SYR4 2012–2019
TTHM
62.6 µg/L 78%
of the EPA limit 80 µg/L
worst single sample: 84 µg/L
32/32 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
54.7 µg/L 91%
of the EPA limit 60 µg/L
worst single sample: 59 µg/L
32/32 SYR4 2012–2019
Trichloroacetic Acid
32.9 µg/L
No EPA limit set
worst single sample: 42 µg/L
32/32 SYR4 2012–2019
Copper
140.6 µg/L 11%
of the EPA limit 1300 µg/L
worst single sample: 199 µg/L
17/28 SYR4 2012–2019
Monochloroacetic Acid
2.78 µg/L
No EPA limit set
worst single sample: 3.1 µg/L
17/32 SYR4 2012–2019
Lead
0.0103 mg/L 69%
of the EPA limit 0.0150 mg/L
 11/11 LCR 2023
Barium
23.9 µg/L 1.2%
of the EPA limit 2000 µg/L
worst single sample: 26 µg/L
8/8 SYR4 2012–2019
Fluoride
1543 µg/L 39%
of the EPA limit 4000 µg/L
worst single sample: 1570 µg/L
7/8 SYR4 2012–2019
Lead
19.176 µg/L 128%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 22.6 µg/L
5/28 SYR4 2012–2019
Gross Beta Particle Activity
2.71 pCi/L
No EPA limit set
worst single sample: 2.8 pCi/L
2/2 SYR4 2012–2018
Nitrate-Nitrite
60 µg/L 0.6%
of the EPA limit 10000 µg/L
 2/16 SYR4 2012–2019
Combined Radium (-226 And -228)
0.4000 pCi/L 8%
of the EPA limit 5 pCi/L
 1/1 SYR4 2018
Dibromochloromethane
0.5000 µg/L
No EPA limit set
 1/40 SYR4 2012–2019
60 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MATTHEWS, TONY
Phone
434-676-2452
Email
[email protected]

Frequently asked questions about Kenbridge, Town of

Is Kenbridge, Town of tap water safe to drink?

EPA monitoring detected 16 contaminants in Kenbridge, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Kenbridge, Town of's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Kenbridge, Town of serve?

Kenbridge, Town of reports serving 1,400 people in Virginia, per its EPA record.

Has Kenbridge, Town of had any water quality violations?

The EPA has 31 violations on file for Kenbridge, Town of, of which 24 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.