Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2000-07-01 → 2000-07-12 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1411 µg/L 109% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 2050 µg/L | 19/19 | SYR4 | 2012–2018 |
| Lead | 17.99 µg/L 120% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 28.7 µg/L | 19/19 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 1900 µg/L 19% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0035 mg/L 23% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Xylenes, Total | 37.1425 µg/L 0.4% of the EPA limit 10000 µg/L
worst single sample: 47.1 µg/L | 6/7 | SYR4 | 2012–2018 |
| Chloroform | 4.714 µg/L No EPA limit set
worst single sample: 4.84 µg/L | 4/4 | SYR4 | 2013–2019 |
| Barium | 33.28 µg/L 1.7% of the EPA limit 2000 µg/L
worst single sample: 35.7 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 0.6476 µg/L No EPA limit set
worst single sample: 0.6700 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 7.085 µg/L No EPA limit set
worst single sample: 7.68 µg/L | 3/3 | SYR4 | 2013–2019 |
| Ethylbenzene | 4.968 µg/L 0.7% of the EPA limit 700 µg/L
worst single sample: 5.46 µg/L | 3/8 | SYR4 | 2012–2019 |
| TTHM | 5.124 µg/L 6.4% of the EPA limit 80 µg/L
worst single sample: 5.41 µg/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 18.688 µg/L 31% of the EPA limit 60 µg/L
worst single sample: 20.2 µg/L | 3/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.403 µg/L No EPA limit set
worst single sample: 11.4 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.5857 µg/L No EPA limit set
worst single sample: 0.6100 µg/L | 2/4 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.1715 µg/L No EPA limit set
worst single sample: 2.23 µg/L | 2/3 | SYR4 | 2013–2019 |
| Antimony, Total | 0.2000 µg/L 3.3% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2012–2018 |
| Bromoform | 0.4000 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.4 pCi/L 28% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2017 |
| Fluoride | 50 µg/L 1.3% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 2.4 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
| Toluene | 32.8 µg/L 3.3% of the EPA limit 1000 µg/L | 1/8 | SYR4 | 2012–2019 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Valley Mills Crossing
Is Valley Mills Crossing tap water safe to drink?
EPA monitoring detected 21 contaminants in Valley Mills Crossing's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Valley Mills Crossing's water?
EPA monitoring detected Copper, Lead, Nitrate-Nitrite, Lead, Xylenes, Total, and others. The full list with the level and data source for each is above.
How many people does Valley Mills Crossing serve?
Valley Mills Crossing reports serving 70 people in Virginia, per its EPA record.
Has Valley Mills Crossing had any water quality violations?
The EPA has 1 violation on file for Valley Mills Crossing, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.