Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2004-10-01 → 2004-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 134.2 µg/L 10% of the EPA limit 1300 µg/L
worst single sample: 233 µg/L | 60/69 | SYR4 | 2012–2019 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2024 |
| Fluoride | 3684 µg/L 92% of the EPA limit 4000 µg/L
worst single sample: 3750 µg/L | 13/13 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.845 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 12/22 | SYR4 | 2012–2019 |
| Bromoform | 4.34 µg/L No EPA limit set
worst single sample: 5 µg/L | 12/22 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.145 µg/L No EPA limit set
worst single sample: 4.2 µg/L | 12/22 | SYR4 | 2012–2019 |
| TTHM | 9.9 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 10 µg/L | 11/11 | SYR4 | 2012–2019 |
| Lead | 5.522 µg/L 37% of the EPA limit 15 µg/L
worst single sample: 6.59 µg/L | 9/69 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.665 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 8/11 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 1.665 µg/L 2.8% of the EPA limit 60 µg/L
worst single sample: 1.7 µg/L | 8/11 | SYR4 | 2012–2019 |
| Chloroform | 0.8700 µg/L No EPA limit set
worst single sample: 0.9000 µg/L | 7/22 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.085 pCi/L No EPA limit set
worst single sample: 4.1 pCi/L | 4/4 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 0.7700 pCi/L 15% of the EPA limit 5 pCi/L
worst single sample: 0.8000 pCi/L | 3/4 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 80 µg/L 0.8% of the EPA limit 10000 µg/L | 2/62 | SYR4 | 2012–2019 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/9 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Franklin, City of
Is Franklin, City of tap water safe to drink?
EPA monitoring detected 15 contaminants in Franklin, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Franklin, City of's water?
EPA monitoring detected Copper, Lead, Fluoride, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Franklin, City of serve?
Franklin, City of reports serving 9,000 people in Virginia, per its EPA record.
Has Franklin, City of had any water quality violations?
The EPA has 183 violations on file for Franklin, City of, of which 101 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.