Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 97.675 µg/L 163% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 134 µg/L | 80/80 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 51.905 µg/L No EPA limit set
worst single sample: 86.4 µg/L | 80/80 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 37.28 µg/L No EPA limit set
worst single sample: 45.9 µg/L | 79/79 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.727 µg/L No EPA limit set
worst single sample: 6.59 µg/L | 78/78 | SYR4 | 2012–2019 |
| TTHM | 85.875 µg/L 107% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 102.2 µg/L | 78/78 | SYR4 | 2012–2019 |
| Chloroform | 79.525 µg/L No EPA limit set
worst single sample: 97.2 µg/L | 76/76 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.97 µg/L No EPA limit set
worst single sample: 5.13 µg/L | 64/80 | SYR4 | 2012–2019 |
| Copper | 264.75 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 404 µg/L | 60/68 | SYR4 | 2012–2019 |
| Lead | 11.82 µg/L 79% of the EPA limit 15 µg/L
worst single sample: 37.4 µg/L | 35/69 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Nitrate-Nitrite | 100 µg/L 1% of the EPA limit 10000 µg/L | 10/14 | SYR4 | 2012–2019 |
| Barium | 15.67 µg/L 0.8% of the EPA limit 2000 µg/L
worst single sample: 16.3 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.9770 µg/L No EPA limit set
worst single sample: 0.9800 µg/L | 7/78 | SYR4 | 2012–2019 |
| Fluoride | 724 µg/L 18% of the EPA limit 4000 µg/L
worst single sample: 730 µg/L | 3/8 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.517 µg/L No EPA limit set
worst single sample: 2.58 µg/L | 2/80 | SYR4 | 2012–2019 |
| Nitrate | 100 µg/L 1% of the EPA limit 10000 µg/L | 2/4 | SYR4 | 2018–2019 |
| Antimony, Total | 0.3000 µg/L 5% of the EPA limit 6 µg/L | 1/8 | SYR4 | 2012–2019 |
| Cyanide | 11 µg/L 5.5% of the EPA limit 200 µg/L | 1/7 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 2.1 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
| Mercury | 0.2000 µg/L 10% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2012–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Pulaski, Town of
Is Pulaski, Town of tap water safe to drink?
EPA monitoring detected 20 contaminants in Pulaski, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pulaski, Town of's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Dichloroacetic Acid, Bromodichloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Pulaski, Town of serve?
Pulaski, Town of reports serving 9,473 people in Virginia, per its EPA record.
Has Pulaski, Town of had any water quality violations?
The EPA has 73 violations on file for Pulaski, Town of, of which 34 are health-based (a contaminant limit or required treatment was breached) and 5 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.