Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Archived | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Archived | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Archived | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 1998-10-01 → 1998-10-31 |
| MCL | Health-based | Archived | 1998-09-01 → 1998-09-30 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1390 µg/L 14% of the EPA limit 10000 µg/L
worst single sample: 1500 µg/L | 32/32 | SYR4 | 2012–2019 |
| Lead | 0.0112 mg/L 75% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2025 |
| Copper | 218.29 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 502 µg/L | 15/15 | SYR4 | 2012–2019 |
| Lead | 10.1 µg/L 67% of the EPA limit 15 µg/L
worst single sample: 13.2 µg/L | 11/15 | SYR4 | 2012–2019 |
| Arsenic | 6.775 µg/L 68% of the EPA limit 10 µg/L
worst single sample: 6.8 µg/L | 6/6 | SYR4 | 2013–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2013–2019 |
| Selenium | 0.9500 µg/L 1.9% of the EPA limit 50 µg/L
worst single sample: 1 µg/L | 6/6 | SYR4 | 2013–2019 |
| Barium | 8.62 µg/L 0.4% of the EPA limit 2000 µg/L
worst single sample: 8.8 µg/L | 3/6 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.8900 µg/L No EPA limit set
worst single sample: 0.9000 µg/L | 3/6 | SYR4 | 2012–2017 |
| TTHM | 2.61 µg/L 3.3% of the EPA limit 80 µg/L
worst single sample: 2.7 µg/L | 3/4 | SYR4 | 2012–2017 |
| Bromodichloromethane | 0.7900 µg/L No EPA limit set
worst single sample: 0.8000 µg/L | 2/6 | SYR4 | 2012–2017 |
| Cyanide | 5.8 µg/L 2.9% of the EPA limit 200 µg/L
worst single sample: 6 µg/L | 2/6 | SYR4 | 2013–2019 |
| Chloroform | 0.9800 µg/L No EPA limit set
worst single sample: 1 µg/L | 2/6 | SYR4 | 2012–2017 |
| Gross Alpha, Excl. Radon And U | 4.155 pCi/L 28% of the EPA limit 15 pCi/L
worst single sample: 4.3 pCi/L | 2/2 | SYR4 | 2019 |
| Gross Beta Particle Activity | 1.6505 pCi/L No EPA limit set
worst single sample: 1.7 pCi/L | 2/2 | SYR4 | 2019 |
| Bromoform | 0.6000 µg/L No EPA limit set | 1/6 | SYR4 | 2012–2017 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Bicknell Town
Is Bicknell Town tap water safe to drink?
EPA monitoring detected 16 contaminants in Bicknell Town's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bicknell Town's water?
EPA monitoring detected Nitrate, Lead, Copper, Lead, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Bicknell Town serve?
Bicknell Town reports serving 380 people in Utah, per its EPA record.
Has Bicknell Town had any water quality violations?
The EPA has 94 violations on file for Bicknell Town, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.