Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-10-02 |
| TT | Health-based | Resolved | 2025-10-02 |
| TT | Health-based | Resolved | 2025-10-02 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-07-31 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-07-31 |
| MCL | Health-based | Resolved | 2008-07-01 → 2008-07-31 |
| MCL | Health-based | Archived | 1998-11-01 → 1998-11-30 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MON | Monitoring | Archived | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2025-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0059 mg/L 39% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2024 |
| Nitrate | 686 µg/L 6.9% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2012–2019 |
| Copper | 591.25 µg/L 45% of the EPA limit 1300 µg/L
worst single sample: 679 µg/L | 10/10 | SYR4 | 2015–2018 |
| Lead | 9.7 µg/L 65% of the EPA limit 15 µg/L
worst single sample: 9.92 µg/L | 6/10 | SYR4 | 2015–2018 |
| Arsenic | 2.8 µg/L 28% of the EPA limit 10 µg/L | 3/3 | SYR4 | 2013–2019 |
| Barium | 47.99 µg/L 2.4% of the EPA limit 2000 µg/L
worst single sample: 48.1 µg/L | 3/3 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 7.9 pCi/L 53% of the EPA limit 15 pCi/L
worst single sample: 8.2 pCi/L | 3/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 520.4 µg/L 5.2% of the EPA limit 10000 µg/L
worst single sample: 533 µg/L | 3/3 | SYR4 | 2017–2018 |
| Combined Radium (-226 And -228) | 1.855 pCi/L 37% of the EPA limit 5 pCi/L
worst single sample: 1.9 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Fluoride | 195.985 µg/L 4.9% of the EPA limit 4000 µg/L
worst single sample: 200 µg/L | 2/3 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 5.65 pCi/L No EPA limit set
worst single sample: 5.8 pCi/L | 2/2 | SYR4 | 2016–2019 |
| Selenium | 0.8000 µg/L 1.6% of the EPA limit 50 µg/L | 2/3 | SYR4 | 2013–2019 |
| Cyanide | 2 µg/L 1% of the EPA limit 200 µg/L | 1/3 | SYR4 | 2013–2019 |
51 contaminants tested, none detected
Utility contact
Frequently asked questions about Harmony Heights Water Company
Is Harmony Heights Water Company tap water safe to drink?
EPA monitoring detected 13 contaminants in Harmony Heights Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harmony Heights Water Company's water?
EPA monitoring detected Lead, Nitrate, Copper, Lead, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Harmony Heights Water Company serve?
Harmony Heights Water Company reports serving 120 people in Utah, per its EPA record.
Has Harmony Heights Water Company had any water quality violations?
The EPA has 149 violations on file for Harmony Heights Water Company, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.