Tap WaterIndex

← Utah

Tap water quality report

Alpine City

EPA monitoring tested this supplier for 104 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

104
contaminants tested
15
detected
10,200
people served
6
health-based violations
Utah rankingsLead in UtahPFAS in Utah
Water source
Ground water
Ownership
Local government
Counties served
Utah

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

6
health-based violations
197
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2013-04-14
TT Health-based Resolved 2013-04-14
TT Health-based Resolved 2013-04-14
TT Health-based Resolved 2013-04-14
TT Health-based Resolved 2013-04-14
TT Health-based Resolved 2013-04-14
MR Monitoring Resolved 1996-01-01 → 1996-12-31
MR Monitoring Resolved 1996-01-01 → 1996-12-31
MR Monitoring Resolved 1996-01-01 → 1996-12-31
MR Monitoring Resolved 1996-01-01 → 1996-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
221.665 µg/L 17%
of the EPA limit 1300 µg/L
worst single sample: 388 µg/L
62/62 SYR4 2013–2019
Lead
5.52 µg/L 37%
of the EPA limit 15 µg/L
worst single sample: 8.7 µg/L
49/61 SYR4 2013–2019
Nitrate
1035 µg/L 10%
of the EPA limit 10000 µg/L
worst single sample: 1100 µg/L
34/34 SYR4 2012–2019
Lead
0.0012 mg/L 8%
of the EPA limit 0.0150 mg/L
 21/21 LCR 2025
Chloroform
2.1 µg/L
No EPA limit set
 6/6 SYR4 2014–2019
TTHM
3.05 µg/L 3.8%
of the EPA limit 80 µg/L
worst single sample: 3.1 µg/L
6/6 SYR4 2014–2019
Barium
85.8 µg/L 4.3%
of the EPA limit 2000 µg/L
worst single sample: 88 µg/L
5/5 SYR4 2013–2019
Bromodichloromethane
0.9800 µg/L
No EPA limit set
worst single sample: 1 µg/L
5/6 SYR4 2014–2019
Fluoride
284.28 µg/L 7.1%
of the EPA limit 4000 µg/L
worst single sample: 300 µg/L
5/5 SYR4 2013–2019
Selenium
1.125 µg/L 2.3%
of the EPA limit 50 µg/L
worst single sample: 1.2 µg/L
4/5 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
1.17 pCi/L 7.8%
of the EPA limit 15 pCi/L
worst single sample: 1.2 pCi/L
2/4 SYR4 2013–2019
Gross Beta Particle Activity
1.2695 pCi/L
No EPA limit set
worst single sample: 1.3 pCi/L
2/3 SYR4 2013–2019
Nitrate-Nitrite
785 µg/L 7.9%
of the EPA limit 10000 µg/L
worst single sample: 800 µg/L
2/2 SYR4 2013
Dibromochloromethane
0.6000 µg/L
No EPA limit set
 1/6 SYR4 2014–2019
Dichloroacetic Acid
1.1 µg/L
No EPA limit set
 1/6 SYR4 2014–2019
89 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SORENSEN, SHANE LYNN
Phone
801-756-6347
Email
[email protected]

Frequently asked questions about Alpine City

Is Alpine City tap water safe to drink?

EPA monitoring detected 15 contaminants in Alpine City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Alpine City's water?

EPA monitoring detected Copper, Lead, Nitrate, Lead, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Alpine City serve?

Alpine City reports serving 10,200 people in Utah, per its EPA record.

Has Alpine City had any water quality violations?

The EPA has 197 violations on file for Alpine City, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.