← Utah

Tap water quality report

Ashley Valley Water and Sewer Id

EPA monitoring tested this supplier for 80 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
17
detected
13,835
people served
3
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Uintah

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
105
violations on file
1
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2018-01-01 → 2018-01-31
TT Health-based Resolved 2018-01-01 → 2018-01-31
TT Health-based Resolved 2018-01-01 → 2018-01-31
MON Monitoring Resolved 2020-01-01 → 2020-01-31
MON Monitoring Resolved 2020-01-01 → 2020-01-31
MON Monitoring Resolved 2020-01-01 → 2020-01-31
RPT Monitoring Resolved 2019-12-29
RPT Monitoring Resolved 2019-12-29
RPT Monitoring Resolved 2019-12-29
Other Monitoring Resolved 2019-07-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
326.55 µg/L 25%
of the EPA limit 1300 µg/L
worst single sample: 415 µg/L
64/64 SYR4 2012–2018
Lead
3.76 µg/L 25%
of the EPA limit 15 µg/L
worst single sample: 12.2 µg/L
52/64 SYR4 2012–2018
Lead
0.0071 mg/L 47%
of the EPA limit 0.0150 mg/L
22/22 LCR 2024
TTHM
43.3 µg/L 54%
of the EPA limit 80 µg/L
worst single sample: 51 µg/L
21/21 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
38.64 µg/L 64%
of the EPA limit 60 µg/L
worst single sample: 39 µg/L
19/21 SYR4 2012–2019
Nitrate
300 µg/L 3%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Bromodichloromethane
4.38 µg/L
No EPA limit set
worst single sample: 4.9 µg/L
14/16 SYR4 2012–2019
Chloroform
42.22 µg/L
No EPA limit set
worst single sample: 46.9 µg/L
14/16 SYR4 2012–2019
Dichloroacetic Acid
14.935 µg/L
No EPA limit set
worst single sample: 15 µg/L
14/14 SYR4 2012–2019
Trichloroacetic Acid
23.805 µg/L
No EPA limit set
worst single sample: 24 µg/L
14/14 SYR4 2012–2019
Dibromochloromethane
1.325 µg/L
No EPA limit set
worst single sample: 1.4 µg/L
4/16 SYR4 2012–2019
Arsenic
0.7950 µg/L 8%
of the EPA limit 10 µg/L
worst single sample: 0.8000 µg/L
2/2 SYR4 2016–2019
Barium
86.51 µg/L 4.3%
of the EPA limit 2000 µg/L
worst single sample: 87 µg/L
2/2 SYR4 2016–2019
Cyanide
2 µg/L 1%
of the EPA limit 200 µg/L
1/2 SYR4 2016–2019
Gross Alpha, Excl. Radon And U
0.7500 pCi/L 5%
of the EPA limit 15 pCi/L
1/2 SYR4 2017–2019
Gross Beta Particle Activity
2.1 pCi/L
No EPA limit set
1/2 SYR4 2012–2017
Nitrate-Nitrite
200 µg/L 2%
of the EPA limit 10000 µg/L
1/1 SYR4 2013
63 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalBenzeneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbon TetrachlorideChromiumDichloromethaneDibromoacetic AcidEthylbenzeneFluorideHfpo-DaMercuryMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
GOODRICH, RYAN LEE
Phone
435-545-5035
Email
[email protected]

Frequently asked questions about Ashley Valley Water and Sewer Id

Is Ashley Valley Water and Sewer Id tap water safe to drink?

EPA monitoring detected 17 contaminants in Ashley Valley Water and Sewer Id's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Ashley Valley Water and Sewer Id's water?

EPA monitoring detected Copper, Lead, Lead, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Ashley Valley Water and Sewer Id serve?

Ashley Valley Water and Sewer Id reports serving 13,835 people in Utah, per its EPA record.

Has Ashley Valley Water and Sewer Id had any water quality violations?

The EPA has 105 violations on file for Ashley Valley Water and Sewer Id, of which 3 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.