Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-12-01 → 2005-12-31 |
| MCL | Health-based | Resolved | 2005-12-01 → 2005-12-31 |
| MCL | Health-based | Resolved | 2005-12-01 → 2005-12-31 |
| MCL | Health-based | Resolved | 2005-11-01 → 2005-11-30 |
| MCL | Health-based | Resolved | 2005-11-01 → 2005-11-30 |
| MCL | Health-based | Resolved | 2005-11-01 → 2005-11-30 |
| MCL | Health-based | Archived | 2004-07-01 → 2004-07-31 |
| MCL | Health-based | Archived | 2004-07-01 → 2004-07-31 |
| MCL | Health-based | Archived | 2004-07-01 → 2004-07-31 |
| RPT | Monitoring | Resolved | 2016-06-19 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 3800 µg/L 38% of the EPA limit 10000 µg/L
worst single sample: 4100 µg/L | 46/48 | SYR4 | 2012–2019 |
| Copper | 406.71 µg/L 31% of the EPA limit 1300 µg/L
worst single sample: 442 µg/L | 30/30 | SYR4 | 2013–2019 |
| Lead | 7.22 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 11.6 µg/L | 25/30 | SYR4 | 2013–2019 |
| Lead | 0.0029 mg/L 19% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Arsenic | 2.72 µg/L 27% of the EPA limit 10 µg/L
worst single sample: 2.8 µg/L | 9/9 | SYR4 | 2012–2019 |
| Barium | 83.8 µg/L 4.2% of the EPA limit 2000 µg/L
worst single sample: 89 µg/L | 9/9 | SYR4 | 2012–2019 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2012–2019 |
| Selenium | 1.54 µg/L 3.1% of the EPA limit 50 µg/L
worst single sample: 1.7 µg/L | 9/9 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 6.025 pCi/L 40% of the EPA limit 15 pCi/L
worst single sample: 6.2 pCi/L | 8/9 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 6.05 pCi/L No EPA limit set
worst single sample: 6.3 pCi/L | 6/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2600 µg/L 26% of the EPA limit 10000 µg/L
worst single sample: 2800 µg/L | 3/3 | SYR4 | 2012 |
| Cyanide | 2 µg/L 1% of the EPA limit 200 µg/L | 2/9 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.4425 pCi/L 29% of the EPA limit 5 pCi/L
worst single sample: 1.5 pCi/L | 2/2 | SYR4 | 2015–2016 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Elsinore Town Water
Is Elsinore Town Water tap water safe to drink?
EPA monitoring detected 13 contaminants in Elsinore Town Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Elsinore Town Water's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Elsinore Town Water serve?
Elsinore Town Water reports serving 1,105 people in Utah, per its EPA record.
Has Elsinore Town Water had any water quality violations?
The EPA has 123 violations on file for Elsinore Town Water, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.