Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-10-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-10-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-10-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-10-31 |
| MCL | Health-based | Resolved | 2009-08-01 → 2009-08-31 |
| MCL | Health-based | Resolved | 2009-08-01 → 2009-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 36.765 µg/L 61% of the EPA limit 60 µg/L
worst single sample: 44.2 µg/L | 148/150 | SYR4 | 2012–2019 |
| TTHM | 66.525 µg/L 83% of the EPA limit 80 µg/L
worst single sample: 74.6 µg/L | 144/145 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.858 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 137/138 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 17.9 µg/L No EPA limit set
worst single sample: 23.1 µg/L | 128/145 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.45 µg/L No EPA limit set
worst single sample: 18.6 µg/L | 126/140 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 20.36 µg/L No EPA limit set
worst single sample: 23.2 µg/L | 125/145 | SYR4 | 2012–2019 |
| Chloroform | 50.5 µg/L No EPA limit set
worst single sample: 58.6 µg/L | 121/140 | SYR4 | 2012–2019 |
| Copper | 326.79 µg/L 25% of the EPA limit 1300 µg/L
worst single sample: 501 µg/L | 67/71 | SYR4 | 2012–2017 |
| Lead | 8.34 µg/L 56% of the EPA limit 15 µg/L
worst single sample: 13.1 µg/L | 53/71 | SYR4 | 2012–2017 |
| Nitrate | 4700 µg/L 47% of the EPA limit 10000 µg/L
worst single sample: 4800 µg/L | 48/48 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.42 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 29/145 | SYR4 | 2012–2019 |
| Bromoform | 13.435 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 28/140 | SYR4 | 2012–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 26/26 | LCR | 2025 |
| Arsenic | 5.59 µg/L 56% of the EPA limit 10 µg/L
worst single sample: 5.8 µg/L | 8/8 | SYR4 | 2012–2017 |
| Barium | 699.9 µg/L 35% of the EPA limit 2000 µg/L
worst single sample: 982 µg/L | 8/8 | SYR4 | 2012–2017 |
| Selenium | 4.355 µg/L 8.7% of the EPA limit 50 µg/L
worst single sample: 4.6 µg/L | 8/8 | SYR4 | 2012–2017 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 7/8 | SYR4 | 2012–2017 |
| Nitrate-Nitrite | 4640 µg/L 46% of the EPA limit 10000 µg/L
worst single sample: 4700 µg/L | 7/7 | SYR4 | 2012–2014 |
| Gross Alpha, Excl. Radon And U | 8.36 pCi/L 56% of the EPA limit 15 pCi/L
worst single sample: 8.6 pCi/L | 5/9 | SYR4 | 2012–2015 |
| Gross Beta Particle Activity | 11 pCi/L No EPA limit set | 4/11 | SYR4 | 2012–2015 |
| Monochloroacetic Acid | 2.175 µg/L No EPA limit set
worst single sample: 2.18 µg/L | 2/145 | SYR4 | 2012–2019 |
| Lithium | 16 µg/L No EPA limit set | 2/4 | UCMR-5 | 2024 |
| Combined Radium (-226 And -228) | 0.6600 pCi/L 13% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2012–2013 |
84 contaminants tested, none detected
Utility contact
Frequently asked questions about Riverton City Water
Is Riverton City Water tap water safe to drink?
EPA monitoring detected 23 contaminants in Riverton City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Riverton City Water's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Dibromochloromethane, Dichloroacetic Acid, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Riverton City Water serve?
Riverton City Water reports serving 45,600 people in Utah, per its EPA record.
Has Riverton City Water had any water quality violations?
The EPA has 685 violations on file for Riverton City Water, of which 42 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.