Tap WaterIndex

← Utah

Tap water quality report

Morgan City Water

EPA monitoring tested this supplier for 103 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

103
contaminants tested
21
detected
4,520
people served
5
health-based violations
Utah rankingsLead in UtahPFAS in Utah
Water source
Ground water
Ownership
Local government
Counties served
Morgan

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

5
health-based violations
241
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2016-02-27
TT Health-based Resolved 2016-02-27
TT Health-based Resolved 2016-02-27
TT Health-based Resolved 2016-02-27
TT Health-based Resolved 2016-02-27
Other Monitoring Resolved 2025-10-02
Other Monitoring Resolved 2025-10-02
Other Monitoring Resolved 2017-10-01
Other Monitoring Resolved 2017-10-01
Other Monitoring Resolved 2017-10-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
3450 µg/L 35%
of the EPA limit 10000 µg/L
worst single sample: 4900 µg/L
78/78 SYR4 2012–2019
Copper
245.75 µg/L 19%
of the EPA limit 1300 µg/L
worst single sample: 720.7 µg/L
56/56 SYR4 2013–2019
Lead
4.54 µg/L 30%
of the EPA limit 15 µg/L
worst single sample: 7.1 µg/L
44/55 SYR4 2013–2019
Lead
0.0013 mg/L 8.7%
of the EPA limit 0.0150 mg/L
 21/21 LCR 2025
Lithium
23 µg/L
No EPA limit set
 9/10 UCMR-5 2025
Barium
281.795 µg/L 14%
of the EPA limit 2000 µg/L
worst single sample: 333 µg/L
8/8 SYR4 2013–2018
Dibromochloromethane
3.695 µg/L
No EPA limit set
worst single sample: 3.8 µg/L
8/15 SYR4 2013–2019
Selenium
1.4 µg/L 2.8%
of the EPA limit 50 µg/L
 8/8 SYR4 2013–2018
TTHM
9.225 µg/L 12%
of the EPA limit 80 µg/L
worst single sample: 9.4 µg/L
8/14 SYR4 2013–2019
Bromoform
2.97 µg/L
No EPA limit set
worst single sample: 3 µg/L
7/15 SYR4 2013–2019
Bromodichloromethane
2 µg/L
No EPA limit set
 6/15 SYR4 2013–2019
Dibromoacetic Acid
1.5 µg/L
No EPA limit set
worst single sample: 1.6 µg/L
6/14 SYR4 2013–2019
Arsenic
1.44 µg/L 14%
of the EPA limit 10 µg/L
worst single sample: 1.5 µg/L
5/8 SYR4 2013–2018
Fluoride
680 µg/L 17%
of the EPA limit 4000 µg/L
worst single sample: 700 µg/L
5/8 SYR4 2013–2018
Chloroform
0.9550 µg/L
No EPA limit set
worst single sample: 1 µg/L
4/15 SYR4 2013–2019
Cyanide
3 µg/L 1.5%
of the EPA limit 200 µg/L
 3/8 SYR4 2013–2018
Gross Beta Particle Activity
7.105 pCi/L
No EPA limit set
worst single sample: 7.3 pCi/L
2/3 SYR4 2012–2018
Dichloroacetic Acid
21.4 µg/L
No EPA limit set
 1/14 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
2.1 pCi/L 14%
of the EPA limit 15 pCi/L
 1/6 SYR4 2012–2018
Total Haloacetic Acids (HAA5)
51.4 µg/L 86%
of the EPA limit 60 µg/L
 1/14 SYR4 2013–2019
Trichloroacetic Acid
30 µg/L
No EPA limit set
 1/14 SYR4 2013–2019
82 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
WATKINS, KALE SHAYNE
Phone
801-516-8112
Email
[email protected]

Frequently asked questions about Morgan City Water

Is Morgan City Water tap water safe to drink?

EPA monitoring detected 21 contaminants in Morgan City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Morgan City Water's water?

EPA monitoring detected Nitrate, Copper, Lead, Lead, Lithium, and others. The full list with the level and data source for each is above.

How many people does Morgan City Water serve?

Morgan City Water reports serving 4,520 people in Utah, per its EPA record.

Has Morgan City Water had any water quality violations?

The EPA has 241 violations on file for Morgan City Water, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.