Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2025-01-21 |
| TT | Health-based | Unaddressed | 2025-01-21 |
| TT | Health-based | Resolved | 2017-01-28 |
| TT | Health-based | Resolved | 2017-01-28 |
| TT | Health-based | Resolved | 2017-01-28 |
| MR | Monitoring | Resolved | 2020-08-06 |
| MR | Monitoring | Resolved | 2020-08-06 |
| MR | Monitoring | Resolved | 2020-08-06 |
| MR | Monitoring | Resolved | 2017-03-01 → 2017-03-31 |
| MR | Monitoring | Resolved | 2017-03-01 → 2017-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0098 mg/L 65% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2025 |
| Copper | 110 µg/L 8.5% of the EPA limit 1300 µg/L
worst single sample: 137 µg/L | 16/16 | SYR4 | 2013–2019 |
| Lead | 3.695 µg/L 25% of the EPA limit 15 µg/L
worst single sample: 4.3 µg/L | 12/16 | SYR4 | 2013–2019 |
| Barium | 95.4 µg/L 4.8% of the EPA limit 2000 µg/L
worst single sample: 96 µg/L | 4/4 | SYR4 | 2012–2019 |
| Fluoride | 338.08 µg/L 8.5% of the EPA limit 4000 µg/L
worst single sample: 344.8 µg/L | 4/4 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 40.375 pCi/L No EPA limit set
worst single sample: 46 pCi/L | 4/4 | SYR4 | 2013–2019 |
| Arsenic | 1.75 µg/L 18% of the EPA limit 10 µg/L
worst single sample: 1.8 µg/L | 2/4 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.09 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 2/6 | SYR4 | 2012–2018 |
| Chloroform | 1.475 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/6 | SYR4 | 2012–2018 |
| Dibromochloromethane | 0.7000 µg/L No EPA limit set | 2/6 | SYR4 | 2012–2018 |
| Gross Alpha, Excl. Radon And U | 3.395 pCi/L 23% of the EPA limit 15 pCi/L
worst single sample: 3.5 pCi/L | 2/4 | SYR4 | 2013–2019 |
| Selenium | 3.45 µg/L 6.9% of the EPA limit 50 µg/L
worst single sample: 3.6 µg/L | 2/4 | SYR4 | 2012–2019 |
| TTHM | 3.265 µg/L 4.1% of the EPA limit 80 µg/L
worst single sample: 3.3 µg/L | 2/3 | SYR4 | 2013–2018 |
| Cyanide | 2 µg/L 1% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2012–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Henrieville Town Water
Is Henrieville Town Water tap water safe to drink?
EPA monitoring detected 14 contaminants in Henrieville Town Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Henrieville Town Water's water?
EPA monitoring detected Lead, Copper, Lead, Barium, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Henrieville Town Water serve?
Henrieville Town Water reports serving 221 people in Utah, per its EPA record.
Has Henrieville Town Water had any water quality violations?
The EPA has 76 violations on file for Henrieville Town Water, of which 5 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.