Tap WaterIndex

← Utah

Tap water quality report

Wellsville City Water

EPA monitoring tested this supplier for 104 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

104
contaminants tested
13
detected
4,190
people served
27
health-based violations
Utah rankingsLead in UtahPFAS in Utah
Water source
Ground water
Ownership
Local government
Counties served
Cache

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

27
health-based violations
619
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
TT Health-based Resolved 2017-03-17
MCL Health-based Archived 2013-08-01 → 2013-08-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
115.005 µg/L 8.8%
of the EPA limit 1300 µg/L
worst single sample: 238.6 µg/L
48/49 SYR4 2013–2019
Nitrate
824.3 µg/L 8.2%
of the EPA limit 10000 µg/L
worst single sample: 854 µg/L
32/32 SYR4 2012–2019
Lead
4.92 µg/L 33%
of the EPA limit 15 µg/L
worst single sample: 7.1 µg/L
29/49 SYR4 2013–2019
Lead
0.0028 mg/L 19%
of the EPA limit 0.0150 mg/L
 21/21 LCR 2025
Nitrate-Nitrite
830.9 µg/L 8.3%
of the EPA limit 10000 µg/L
worst single sample: 854 µg/L
4/4 SYR4 2015–2017
Barium
140.31 µg/L 7%
of the EPA limit 2000 µg/L
worst single sample: 140.9 µg/L
3/3 SYR4 2014–2019
Selenium
0.9800 µg/L 2%
of the EPA limit 50 µg/L
worst single sample: 1 µg/L
3/3 SYR4 2014–2019
Arsenic
0.6950 µg/L 7%
of the EPA limit 10 µg/L
worst single sample: 0.7000 µg/L
2/3 SYR4 2014–2019
Fluoride
198.335 µg/L 5%
of the EPA limit 4000 µg/L
worst single sample: 200 µg/L
2/3 SYR4 2014–2019
Gross Beta Particle Activity
3.63 pCi/L
No EPA limit set
worst single sample: 3.7 pCi/L
2/2 SYR4 2014
Lithium
9.7 µg/L
No EPA limit set
 2/3 UCMR-5 2025
Chloroform
0.6000 µg/L
No EPA limit set
 1/7 SYR4 2014–2019
TTHM
0.6000 µg/L 0.8%
of the EPA limit 80 µg/L
 1/6 SYR4 2014–2019
91 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDibromochloromethaneDichloroacetic AcidDinosebEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
WELLS, SCOTT
Phone
435-245-3686
Email
[email protected]

Frequently asked questions about Wellsville City Water

Is Wellsville City Water tap water safe to drink?

EPA monitoring detected 13 contaminants in Wellsville City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wellsville City Water's water?

EPA monitoring detected Copper, Nitrate, Lead, Lead, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.

How many people does Wellsville City Water serve?

Wellsville City Water reports serving 4,190 people in Utah, per its EPA record.

Has Wellsville City Water had any water quality violations?

The EPA has 619 violations on file for Wellsville City Water, of which 27 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.