← Utah

Tap water quality report

Millville City

EPA monitoring tested this supplier for 75 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

75
contaminants tested
11
detected
1,900
people served
13
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Cache

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

13
health-based violations
99
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1999-05-01 → 1999-05-31
MCL Health-based Archived 1996-02-01 → 1996-02-29
MCL Health-based Archived 1996-01-01 → 1996-01-31
MCL Health-based Archived 1995-10-01 → 1995-10-31
MCL Health-based Archived 1995-06-01 → 1995-06-30
MCL Health-based Archived 1992-06-01 → 1992-06-30
MCL Health-based Archived 1992-06-01 → 1992-06-30
MCL Health-based Archived 1992-05-01 → 1992-05-31
MCL Health-based Archived 1992-05-01 → 1992-05-31
MCL Health-based Archived 1992-05-01 → 1992-05-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
180 µg/L 14%
of the EPA limit 1300 µg/L
worst single sample: 1845.4 µg/L
32/32 SYR4 2013–2019
Lead
8.67 µg/L 58%
of the EPA limit 15 µg/L
worst single sample: 10.1 µg/L
28/32 SYR4 2013–2019
Nitrate
8024.5 µg/L 80%
of the EPA limit 10000 µg/L
worst single sample: 8140 µg/L
28/28 SYR4 2012–2019
Lead
0.0040 mg/L 27%
of the EPA limit 0.0150 mg/L
19/19 LCR 2025
Nitrate-Nitrite
8808.5 µg/L 88%
of the EPA limit 10000 µg/L
worst single sample: 8980 µg/L
8/8 SYR4 2014–2018
Barium
232.875 µg/L 12%
of the EPA limit 2000 µg/L
worst single sample: 239.5 µg/L
6/6 SYR4 2013–2019
Arsenic
0.8600 µg/L 8.6%
of the EPA limit 10 µg/L
worst single sample: 0.9000 µg/L
5/6 SYR4 2013–2019
Selenium
1.04 µg/L 2.1%
of the EPA limit 50 µg/L
worst single sample: 1.1 µg/L
5/6 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
6.81 pCi/L 45%
of the EPA limit 15 pCi/L
worst single sample: 7.1 pCi/L
2/3 SYR4 2013–2019
Combined Radium (-226 And -228)
0.6100 pCi/L 12%
of the EPA limit 5 pCi/L
1/1 SYR4 2013
Gross Beta Particle Activity
1.6 pCi/L
No EPA limit set
1/3 SYR4 2013–2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDibromochloromethaneDichloroacetic AcidDinosebEndrinEthylbenzeneFluorideHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidOxamylPentachlorophenolPicloramSimazineStyreneTTHMTetrachloroethyleneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
KENDRICK, VERNON CHAD
Phone
435-881-2669
Email
[email protected]

Frequently asked questions about Millville City

Is Millville City tap water safe to drink?

EPA monitoring detected 11 contaminants in Millville City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Millville City's water?

EPA monitoring detected Copper, Lead, Nitrate, Lead, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.

How many people does Millville City serve?

Millville City reports serving 1,900 people in Utah, per its EPA record.

Has Millville City had any water quality violations?

The EPA has 99 violations on file for Millville City, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.