Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2015-02-07 |
| TT | Health-based | Resolved | 2015-02-07 |
| TT | Health-based | Resolved | 2015-02-07 |
| MCL | Health-based | Archived | 1991-06-01 → 1991-06-30 |
| MCL | Health-based | Archived | 1991-06-01 → 1991-06-30 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 166.735 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 508 µg/L | 40/40 | SYR4 | 2013–2019 |
| Lead | 3.485 µg/L 23% of the EPA limit 15 µg/L
worst single sample: 9.4 µg/L | 40/40 | SYR4 | 2013–2019 |
| Lead | 0.0053 mg/L 35% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2025 |
| Nitrate | 4582.2 µg/L 46% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| TTHM | 3 µg/L 3.8% of the EPA limit 80 µg/L | 8/9 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.07 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 7/8 | SYR4 | 2012–2019 |
| Chloroform | 1.97 µg/L No EPA limit set
worst single sample: 2 µg/L | 7/8 | SYR4 | 2012–2019 |
| Barium | 118.535 µg/L 5.9% of the EPA limit 2000 µg/L
worst single sample: 124 µg/L | 2/2 | SYR4 | 2018–2019 |
| Dichloroacetic Acid | 1.57 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 2/8 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 0.4475 pCi/L 3% of the EPA limit 15 pCi/L
worst single sample: 0.4500 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Lithium | 27 µg/L No EPA limit set | 2/4 | UCMR-5 | 2024 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/2 | SYR4 | 2018–2019 |
| Fluoride | 210.7 µg/L 5.3% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2018–2019 |
| Gross Beta Particle Activity | 0.4400 pCi/L No EPA limit set | 1/2 | SYR4 | 2013–2019 |
| Selenium | 0.6000 µg/L 1.2% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2018–2019 |
| Total Haloacetic Acids (HAA5) | 1.43 µg/L 2.4% of the EPA limit 60 µg/L | 1/9 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.1 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Hyde Park City Water
Is Hyde Park City Water tap water safe to drink?
EPA monitoring detected 17 contaminants in Hyde Park City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hyde Park City Water's water?
EPA monitoring detected Copper, Lead, Lead, Nitrate, TTHM, and others. The full list with the level and data source for each is above.
How many people does Hyde Park City Water serve?
Hyde Park City Water reports serving 5,200 people in Idaho, per its EPA record.
Has Hyde Park City Water had any water quality violations?
The EPA has 80 violations on file for Hyde Park City Water, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.