Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-11-01 → 2008-11-30 |
| MCL | Health-based | Resolved | 2008-11-01 → 2008-11-30 |
| MCL | Health-based | Resolved | 2008-11-01 → 2008-11-30 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| Other | Monitoring | Resolved | 2017-10-01 |
| Other | Monitoring | Resolved | 2017-10-01 |
| Other | Monitoring | Resolved | 2017-10-01 |
| MON | Monitoring | Resolved | 2017-03-01 → 2017-03-31 |
| MON | Monitoring | Resolved | 2017-03-01 → 2017-03-31 |
| MON | Monitoring | Resolved | 2017-03-01 → 2017-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 3410.78 µg/L 34% of the EPA limit 10000 µg/L
worst single sample: 3500 µg/L | 68/68 | SYR4 | 2012–2019 |
| Copper | 184.175 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 310 µg/L | 40/40 | SYR4 | 2013–2019 |
| Lead | 8.82 µg/L 59% of the EPA limit 15 µg/L
worst single sample: 10.4 µg/L | 37/40 | SYR4 | 2013–2019 |
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 25/25 | LCR | 2025 |
| Barium | 67.72 µg/L 3.4% of the EPA limit 2000 µg/L
worst single sample: 68.2 µg/L | 9/9 | SYR4 | 2013–2019 |
| Fluoride | 238.935 µg/L 6% of the EPA limit 4000 µg/L
worst single sample: 259.9 µg/L | 8/9 | SYR4 | 2013–2019 |
| Selenium | 1.44 µg/L 2.9% of the EPA limit 50 µg/L
worst single sample: 1.5 µg/L | 7/9 | SYR4 | 2013–2019 |
| Lithium | 54.6 µg/L No EPA limit set | 6/8 | UCMR-5 | 2024 |
| Gross Beta Particle Activity | 3.285 pCi/L No EPA limit set
worst single sample: 3.3 pCi/L | 4/7 | SYR4 | 2013–2019 |
| Arsenic | 0.7000 µg/L 7% of the EPA limit 10 µg/L | 3/9 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 2.93 pCi/L 20% of the EPA limit 15 pCi/L
worst single sample: 3.1 pCi/L | 3/7 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.485 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/8 | SYR4 | 2013–2019 |
| TTHM | 3.67 µg/L 4.6% of the EPA limit 80 µg/L
worst single sample: 3.8 µg/L | 2/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Bromoform | 1.3 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Cyanide | 2 µg/L 1% of the EPA limit 200 µg/L | 1/9 | SYR4 | 2013–2019 |
87 contaminants tested, none detected
Utility contact
Frequently asked questions about Perry City
Is Perry City tap water safe to drink?
EPA monitoring detected 16 contaminants in Perry City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Perry City's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Barium, and others. The full list with the level and data source for each is above.
How many people does Perry City serve?
Perry City reports serving 6,570 people in Utah, per its EPA record.
Has Perry City had any water quality violations?
The EPA has 25 violations on file for Perry City, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.