Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2011-04-01 → 2011-04-30 |
| MCL | Health-based | Archived | 2011-04-01 → 2011-04-30 |
| MCL | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| MCL | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| MCL | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| MCL | Health-based | Resolved | 2006-11-01 → 2006-11-30 |
| MCL | Health-based | Resolved | 2006-11-01 → 2006-11-30 |
| MCL | Health-based | Resolved | 2006-11-01 → 2006-11-30 |
| MCL | Health-based | Resolved | 2003-03-01 → 2003-03-31 |
| MCL | Health-based | Resolved | 2003-03-01 → 2003-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 900 µg/L 9% of the EPA limit 10000 µg/L | 48/48 | SYR4 | 2012–2019 |
| Copper | 97.8 µg/L 7.5% of the EPA limit 1300 µg/L
worst single sample: 120 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 0.0067 mg/L 45% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2024 |
| Lead | 4.74 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 5.5 µg/L | 20/30 | SYR4 | 2012–2018 |
| Barium | 92.26 µg/L 4.6% of the EPA limit 2000 µg/L
worst single sample: 94 µg/L | 7/7 | SYR4 | 2013–2019 |
| Selenium | 2 µg/L 4% of the EPA limit 50 µg/L
worst single sample: 2.1 µg/L | 6/7 | SYR4 | 2013–2019 |
| Arsenic | 1.08 µg/L 11% of the EPA limit 10 µg/L
worst single sample: 1.1 µg/L | 3/7 | SYR4 | 2013–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 3/7 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 3.138 pCi/L 21% of the EPA limit 15 pCi/L
worst single sample: 3.4 pCi/L | 3/6 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 1.81 pCi/L No EPA limit set
worst single sample: 1.9 pCi/L | 3/6 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 880 µg/L 8.8% of the EPA limit 10000 µg/L
worst single sample: 900 µg/L | 3/3 | SYR4 | 2012 |
| Bromoform | 1 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| TTHM | 1 µg/L 1.3% of the EPA limit 80 µg/L | 1/6 | SYR4 | 2013–2019 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Honeyville Town Water
Is Honeyville Town Water tap water safe to drink?
EPA monitoring detected 13 contaminants in Honeyville Town Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Honeyville Town Water's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Barium, and others. The full list with the level and data source for each is above.
How many people does Honeyville Town Water serve?
Honeyville Town Water reports serving 1,750 people in Utah, per its EPA record.
Has Honeyville Town Water had any water quality violations?
The EPA has 147 violations on file for Honeyville Town Water, of which 29 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.