Tap WaterIndex

← Utah

Tap water quality report

Beaver City Water

EPA monitoring tested this supplier for 77 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

77
contaminants tested
19
detected
3,500
people served
0
health-based violations
Utah rankingsLead in UtahPFAS in Utah
Water source
Ground water
Ownership
Local government
Counties served
Beaver

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
26
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31
MR Monitoring Resolved 2018-01-01 → 2018-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1800 µg/L 18%
of the EPA limit 10000 µg/L
worst single sample: 1993.3 µg/L
50/50 SYR4 2012–2019
Copper
100.165 µg/L 7.7%
of the EPA limit 1300 µg/L
worst single sample: 163 µg/L
30/31 SYR4 2012–2018
Lead
1.9 µg/L 13%
of the EPA limit 15 µg/L
worst single sample: 13.3 µg/L
21/31 SYR4 2012–2018
Lead
0.0064 mg/L 43%
of the EPA limit 0.0150 mg/L
 20/20 LCR 2025
Gross Alpha, Excl. Radon And U
15.035 pCi/L 100%
of the EPA limit, at the 95th percentile of samples — 15 pCi/L
worst single sample: 15.1 pCi/L
14/15 SYR4 2012–2019
Gross Beta Particle Activity
7.395 pCi/L
No EPA limit set
worst single sample: 7.8 pCi/L
10/14 SYR4 2012–2019
Combined Radium (-226 And -228)
1.225 pCi/L 25%
of the EPA limit 5 pCi/L
worst single sample: 1.4 pCi/L
8/12 SYR4 2012–2019
Arsenic
1.5 µg/L 15%
of the EPA limit 10 µg/L
 7/7 SYR4 2013–2019
Bromoform
3.18 µg/L
No EPA limit set
worst single sample: 3.3 µg/L
7/9 SYR4 2013–2019
Dibromochloromethane
2.94 µg/L
No EPA limit set
worst single sample: 3 µg/L
7/9 SYR4 2013–2019
TTHM
8.59 µg/L 11%
of the EPA limit 80 µg/L
worst single sample: 8.8 µg/L
7/7 SYR4 2013–2019
Barium
42.65 µg/L 2.1%
of the EPA limit 2000 µg/L
worst single sample: 44.2 µg/L
6/7 SYR4 2013–2019
Bromodichloromethane
1.575 µg/L
No EPA limit set
worst single sample: 1.6 µg/L
6/9 SYR4 2013–2019
Fluoride
477.25 µg/L 12%
of the EPA limit 4000 µg/L
worst single sample: 484.2 µg/L
6/7 SYR4 2013–2019
Chloroform
0.9850 µg/L
No EPA limit set
worst single sample: 1 µg/L
4/9 SYR4 2013–2019
Combined Uranium
12.475 µg/L 42%
of the EPA limit 30 µg/L
worst single sample: 12.7 µg/L
4/4 SYR4 2012–2019
Nitrate-Nitrite
1710 µg/L 17%
of the EPA limit 10000 µg/L
worst single sample: 1800 µg/L
4/4 SYR4 2013–2015
Selenium
0.8700 µg/L 1.7%
of the EPA limit 50 µg/L
worst single sample: 0.9000 µg/L
4/7 SYR4 2013–2019
Dibromoacetic Acid
1.1 µg/L
No EPA limit set
 1/7 SYR4 2013–2019
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BLACK, BRET ELDON
Phone
435-438-2451
Email
[email protected]

Frequently asked questions about Beaver City Water

Is Beaver City Water tap water safe to drink?

EPA monitoring detected 19 contaminants in Beaver City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Beaver City Water's water?

EPA monitoring detected Nitrate, Copper, Lead, Lead, Gross Alpha, Excl. Radon And U, and others. The full list with the level and data source for each is above.

How many people does Beaver City Water serve?

Beaver City Water reports serving 3,500 people in Utah, per its EPA record.

Has Beaver City Water had any water quality violations?

The EPA has 26 violations on file for Beaver City Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.