Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
7
health-based violations
20
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-04-01 → 2015-04-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-04-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-04-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-04-30 |
| MCL | Health-based | Archived | 1990-11-03 → 1993-11-02 |
| MCL | Health-based | Archived | 1984-11-26 → 1985-11-25 |
| MCL | Health-based | Archived | 1979-06-26 → 1980-06-25 |
| MR | Monitoring | Resolved | 2013-10-01 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-03-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-03-31 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 247.65 µg/L 19% of the EPA limit 1300 µg/L
worst single sample: 630 µg/L | 152/153 | SYR4 | 2013–2017 |
| Bromodichloromethane | 7.965 µg/L No EPA limit set
worst single sample: 13.7 µg/L | 122/131 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.88 µg/L No EPA limit set
worst single sample: 16.6 µg/L | 122/131 | SYR4 | 2012–2019 |
| Bromoform | 5.71 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 119/131 | SYR4 | 2012–2019 |
| TTHM | 25.775 µg/L 32% of the EPA limit 80 µg/L
worst single sample: 43.8 µg/L | 116/125 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 11.85 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 27.8 µg/L | 111/124 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.6 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 109/124 | SYR4 | 2012–2019 |
| Chloroform | 6.18 µg/L No EPA limit set
worst single sample: 12.6 µg/L | 105/131 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 5.6 µg/L No EPA limit set
worst single sample: 11.5 µg/L | 101/124 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.32 µg/L No EPA limit set
worst single sample: 10 µg/L | 39/124 | SYR4 | 2012–2019 |
| Nitrate | 531.5 µg/L 5.3% of the EPA limit 10000 µg/L
worst single sample: 570 µg/L | 32/32 | SYR4 | 2012–2019 |
| Lead | 7.24 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 17.9 µg/L | 31/153 | SYR4 | 2013–2017 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Monochloroacetic Acid | 3.23 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 8/124 | SYR4 | 2012–2019 |
| Lithium | 34.8 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
| Nitrate-Nitrite | 302.5 µg/L 3% of the EPA limit 10000 µg/L
worst single sample: 330 µg/L | 6/6 | SYR4 | 2012–2015 |
| Monobromoacetic Acid | 4.56 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 5/124 | SYR4 | 2012–2019 |
| Barium | 90.07 µg/L 4.5% of the EPA limit 2000 µg/L
worst single sample: 91.3 µg/L | 3/3 | SYR4 | 2013–2019 |
| Fluoride | 308.6 µg/L 7.7% of the EPA limit 4000 µg/L
worst single sample: 310 µg/L | 3/3 | SYR4 | 2013–2019 |
| Atrazine | 0.2617 µg/L 8.7% of the EPA limit 3 µg/L
worst single sample: 0.2700 µg/L | 2/7 | SYR4 | 2013–2019 |
| Cyanide | 137 µg/L 69% of the EPA limit 200 µg/L
worst single sample: 140 µg/L | 2/3 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 5.975 pCi/L No EPA limit set
worst single sample: 6 pCi/L | 2/3 | SYR4 | 2013–2019 |
| Chromium | 0.5190 µg/L 0.5% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Phthalate | 0.6300 µg/L 11% of the EPA limit 6 µg/L | 1/7 | SYR4 | 2013–2019 |
| Nitrite | 30 µg/L 3% of the EPA limit 1000 µg/L | 1/6 | SYR4 | 2012–2015 |
| Selenium | 3.39 µg/L 6.8% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2013–2019 |
82 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Hutto
Is City of Hutto tap water safe to drink?
EPA monitoring detected 26 contaminants in City of Hutto's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Hutto's water?
EPA monitoring detected Copper, Bromodichloromethane, Dibromochloromethane, Bromoform, TTHM, and others. The full list with the level and data source for each is above.
How many people does City of Hutto serve?
City of Hutto reports serving 29,580 people in Texas, per its EPA record.
Has City of Hutto had any water quality violations?
The EPA has 20 violations on file for City of Hutto, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.