Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
59
health-based violations
75
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Archived | 2015-04-01 → 2015-06-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0059 µg/L | 1/4 | 2024 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 798.8 µg/L 80% of the EPA limit 1000 µg/L
worst single sample: 1000 µg/L | 224/228 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 9.305 µg/L No EPA limit set
worst single sample: 46.4 µg/L | 104/104 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 38.2 µg/L 64% of the EPA limit 60 µg/L
worst single sample: 104 µg/L | 104/104 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 22.6 µg/L No EPA limit set
worst single sample: 39.5 µg/L | 103/104 | SYR4 | 2012–2019 |
| Dibromochloromethane | 28.9 µg/L No EPA limit set
worst single sample: 103 µg/L | 101/112 | SYR4 | 2012–2019 |
| TTHM | 98.325 µg/L 123% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 283 µg/L | 96/104 | SYR4 | 2012–2019 |
| Bromodichloromethane | 16.995 µg/L No EPA limit set
worst single sample: 86.2 µg/L | 90/112 | SYR4 | 2012–2019 |
| Copper | 544.05 µg/L 42% of the EPA limit 1300 µg/L
worst single sample: 2040 µg/L | 84/85 | SYR4 | 2013–2019 |
| Bromoform | 41.3 µg/L No EPA limit set
worst single sample: 54 µg/L | 81/112 | SYR4 | 2012–2019 |
| Chloroform | 25 µg/L No EPA limit set
worst single sample: 52.4 µg/L | 65/112 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 13.66 µg/L No EPA limit set
worst single sample: 18.4 µg/L | 40/104 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 6.08 µg/L No EPA limit set
worst single sample: 9.9 µg/L | 37/104 | SYR4 | 2012–2019 |
| Lead | 2.9745 µg/L 20% of the EPA limit 15 µg/L
worst single sample: 3.76 µg/L | 22/85 | SYR4 | 2013–2019 |
| Nitrate | 530 µg/L 5.3% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Fluoride | 476 µg/L 12% of the EPA limit 4000 µg/L
worst single sample: 490 µg/L | 8/8 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 7.38 µg/L No EPA limit set
worst single sample: 8.5 µg/L | 8/104 | SYR4 | 2012–2019 |
| Barium | 147.1 µg/L 7.4% of the EPA limit 2000 µg/L
worst single sample: 151 µg/L | 7/7 | SYR4 | 2013–2019 |
| Atrazine | 0.1700 µg/L 5.7% of the EPA limit 3 µg/L | 4/10 | SYR4 | 2012–2019 |
| Lithium | 48.2 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Arsenic | 2.4 µg/L 24% of the EPA limit 10 µg/L | 3/7 | SYR4 | 2013–2019 |
| Selenium | 5 µg/L 10% of the EPA limit 50 µg/L
worst single sample: 5.1 µg/L | 3/7 | SYR4 | 2013–2019 |
| Cyanide | 139 µg/L 70% of the EPA limit 200 µg/L
worst single sample: 140 µg/L | 2/8 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 3 pCi/L 60% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Di(2-ethylhexyl) Phthalate | 1.3 µg/L 22% of the EPA limit 6 µg/L | 1/10 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 3 pCi/L 20% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Beta Particle Activity | 9.1 pCi/L No EPA limit set | 1/1 | SYR4 | 2014 |
81 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Raymondville
Is City of Raymondville tap water safe to drink?
EPA monitoring detected 28 contaminants in City of Raymondville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Raymondville's water?
EPA monitoring detected Chlorite, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Dibromoacetic Acid, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does City of Raymondville serve?
City of Raymondville reports serving 11,288 people in Texas, per its EPA record.
Has City of Raymondville had any water quality violations?
The EPA has 75 violations on file for City of Raymondville, of which 59 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.