Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
11
health-based violations
75
violations on file
1
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Archived | 1978-10-25 → 1978-11-24 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 254 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 760 µg/L | 133/142 | SYR4 | 2013–2019 |
| Bromoform | 18.005 µg/L No EPA limit set
worst single sample: 42.3 µg/L | 70/70 | SYR4 | 2012–2019 |
| Nitrate | 5620 µg/L 56% of the EPA limit 10000 µg/L
worst single sample: 5960 µg/L | 66/78 | SYR4 | 2012–2019 |
| TTHM | 74.72 µg/L 93% of the EPA limit 80 µg/L
worst single sample: 273 µg/L | 53/54 | SYR4 | 2013–2019 |
| Dibromochloromethane | 18.71 µg/L No EPA limit set
worst single sample: 62.1 µg/L | 52/70 | SYR4 | 2012–2019 |
| Lead | 13.8 µg/L 92% of the EPA limit 15 µg/L
worst single sample: 49 µg/L | 49/142 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 29.41 µg/L 49% of the EPA limit 60 µg/L
worst single sample: 86 µg/L | 40/53 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 5.25 µg/L No EPA limit set
worst single sample: 11.3 µg/L | 31/53 | SYR4 | 2013–2019 |
| Bromodichloromethane | 16 µg/L No EPA limit set
worst single sample: 69.2 µg/L | 21/70 | SYR4 | 2012–2019 |
| Chloroform | 107.75 µg/L No EPA limit set
worst single sample: 122 µg/L | 20/70 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.445 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 20/53 | SYR4 | 2013–2019 |
| Lead | 0.0087 mg/L 58% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Nitrate-Nitrite | 3852.5 µg/L 39% of the EPA limit 10000 µg/L
worst single sample: 5240 µg/L | 16/17 | SYR4 | 2012–2015 |
| Fluoride | 2940 µg/L 74% of the EPA limit 4000 µg/L
worst single sample: 2970 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.9 µg/L No EPA limit set
worst single sample: 34.7 µg/L | 9/53 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 42.26 µg/L No EPA limit set
worst single sample: 45.9 µg/L | 9/53 | SYR4 | 2013–2019 |
| Atrazine | 0.2985 µg/L 10% of the EPA limit 3 µg/L
worst single sample: 0.3000 µg/L | 4/18 | SYR4 | 2012–2019 |
| Barium | 84.45 µg/L 4.2% of the EPA limit 2000 µg/L
worst single sample: 93 µg/L | 4/4 | SYR4 | 2016–2019 |
| Monobromoacetic Acid | 1.865 µg/L No EPA limit set
worst single sample: 2 µg/L | 4/53 | SYR4 | 2013–2019 |
| Xylenes, Total | 14.907 µg/L 0.1% of the EPA limit 10000 µg/L
worst single sample: 17.4 µg/L | 4/17 | SYR4 | 2012–2019 |
| Lithium | 165 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Gross Alpha, Excl. Radon And U | 6.14 pCi/L 41% of the EPA limit 15 pCi/L
worst single sample: 6.2 pCi/L | 2/2 | SYR4 | 2014 |
| Nitrite | 26.15 µg/L 2.6% of the EPA limit 1000 µg/L
worst single sample: 27 µg/L | 2/17 | SYR4 | 2012–2015 |
| Antimony, Total | 0.9200 µg/L 15% of the EPA limit 6 µg/L | 1/4 | SYR4 | 2016–2019 |
| Arsenic | 3.1 µg/L 31% of the EPA limit 10 µg/L | 1/4 | SYR4 | 2016–2019 |
| Cyanide | 24.1 µg/L 12% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2014–2017 |
| Chromium | 3.4 µg/L 3.4% of the EPA limit 100 µg/L | 1/4 | SYR4 | 2016–2019 |
| Combined Uranium | 5.9 µg/L 20% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2014 |
| Di(2-ethylhexyl) Phthalate | 0.6000 µg/L 10% of the EPA limit 6 µg/L | 1/18 | SYR4 | 2012–2019 |
| Ethylbenzene | 2.93 µg/L 0.4% of the EPA limit 700 µg/L | 1/17 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.1 pCi/L No EPA limit set | 1/2 | SYR4 | 2014 |
| Selenium | 3.9 µg/L 7.8% of the EPA limit 50 µg/L | 1/4 | SYR4 | 2016–2019 |
77 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined Radium (-226 And -228)DichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Tulia Municipal Water
Is Tulia Municipal Water tap water safe to drink?
EPA monitoring detected 32 contaminants in Tulia Municipal Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Tulia Municipal Water's water?
EPA monitoring detected Copper, Bromoform, Nitrate, TTHM, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Tulia Municipal Water serve?
Tulia Municipal Water reports serving 4,951 people in Texas, per its EPA record.
Has Tulia Municipal Water had any water quality violations?
The EPA has 75 violations on file for Tulia Municipal Water, of which 11 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.