Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2010-05-01 → 2010-05-31 |
| MCL | Health-based | Resolved | 2010-05-01 → 2010-05-31 |
| MCL | Health-based | Resolved | 2010-05-01 → 2010-05-31 |
| MCL | Health-based | Resolved | 2010-05-01 → 2010-05-31 |
| MCL | Health-based | Archived | 2009-02-01 → 2009-02-28 |
| Other | Monitoring | Resolved | 2026-04-16 |
| Other | Monitoring | Resolved | 2026-04-16 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 12.78 µg/L No EPA limit set
worst single sample: 14.5 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 18.59 µg/L No EPA limit set
worst single sample: 23.2 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 16.59 µg/L No EPA limit set
worst single sample: 19.9 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.885 µg/L No EPA limit set
worst single sample: 23.8 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 52.325 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 58.3 µg/L | 62/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 33.37 µg/L 56% of the EPA limit 60 µg/L
worst single sample: 36.8 µg/L | 62/62 | SYR4 | 2012–2019 |
| Copper | 407.95 µg/L 31% of the EPA limit 1300 µg/L
worst single sample: 762 µg/L | 60/60 | SYR4 | 2013–2017 |
| Bromoform | 27.535 µg/L No EPA limit set
worst single sample: 38.8 µg/L | 58/62 | SYR4 | 2012–2019 |
| Chloroform | 7.505 µg/L No EPA limit set
worst single sample: 10.4 µg/L | 54/62 | SYR4 | 2012–2019 |
| Lead | 4.366 µg/L 29% of the EPA limit 15 µg/L
worst single sample: 8.47 µg/L | 49/60 | SYR4 | 2013–2017 |
| Trichloroacetic Acid | 2.63 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 35/62 | SYR4 | 2012–2019 |
| Lead | 0.0123 mg/L 82% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2026 |
| Monobromoacetic Acid | 6.5 µg/L No EPA limit set
worst single sample: 7.2 µg/L | 15/62 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.06 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 10/62 | SYR4 | 2012–2019 |
| Lithium | 27.4 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Ingleside
Is City of Ingleside tap water safe to drink?
EPA monitoring detected 18 contaminants in City of Ingleside's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Ingleside's water?
EPA monitoring detected Bromodichloromethane, Dibromoacetic Acid, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does City of Ingleside serve?
City of Ingleside reports serving 10,106 people in Texas, per its EPA record.
Has City of Ingleside had any water quality violations?
The EPA has 106 violations on file for City of Ingleside, of which 8 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.