Compliance record
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| PFBS | 0.0035 µg/L | 2/8 | 2024 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 221.5 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 1270 µg/L | 58/66 | SYR4 | 2012–2019 |
| Nitrate | 254.5 µg/L 2.5% of the EPA limit 10000 µg/L
worst single sample: 260 µg/L | 32/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.19 µg/L No EPA limit set
worst single sample: 5 µg/L | 19/29 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.44 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 17/29 | SYR4 | 2012–2019 |
| Bromoform | 2.52 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 15/29 | SYR4 | 2012–2019 |
| Chloroform | 2.1 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 13/29 | SYR4 | 2012–2019 |
| Lead | 0.00049 mg/L 3.2% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Barium | 170.1 µg/L 8.5% of the EPA limit 2000 µg/L
worst single sample: 171 µg/L | 10/10 | SYR4 | 2012–2019 |
| Lead | 2.6335 µg/L 18% of the EPA limit 15 µg/L
worst single sample: 2.7 µg/L | 8/66 | SYR4 | 2012–2019 |
| TTHM | 11.635 µg/L 15% of the EPA limit 80 µg/L
worst single sample: 12.3 µg/L | 8/10 | SYR4 | 2013–2019 |
| Lithium | 20.2 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
| Combined Radium (-226 And -228) | 2.2 pCi/L 44% of the EPA limit 5 pCi/L
worst single sample: 2.5 pCi/L | 7/7 | SYR4 | 2012–2018 |
| Fluoride | 161 µg/L 4% of the EPA limit 4000 µg/L
worst single sample: 170 µg/L | 7/9 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 213.75 µg/L 2.1% of the EPA limit 10000 µg/L
worst single sample: 215 µg/L | 6/13 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.975 µg/L 5% of the EPA limit 60 µg/L
worst single sample: 3.1 µg/L | 6/9 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.68 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 5/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.355 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 4/9 | SYR4 | 2013–2019 |
| Chromium | 1.6526 µg/L 1.7% of the EPA limit 100 µg/L
worst single sample: 1.71 µg/L | 2/10 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.6900 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 0.7000 µg/L | 2/21 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.7700 µg/L 13% of the EPA limit 6 µg/L | 1/14 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.7 pCi/L No EPA limit set | 1/10 | SYR4 | 2012–2018 |
| Toluene | 1.37 µg/L 0.1% of the EPA limit 1000 µg/L | 1/21 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Milano Wsc
Is Milano Wsc tap water safe to drink?
EPA monitoring detected 23 contaminants in Milano Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Milano Wsc's water?
EPA monitoring detected Copper, Nitrate, Dibromochloromethane, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Milano Wsc serve?
Milano Wsc reports serving 4,308 people in Texas, per its EPA record.
Has Milano Wsc had any water quality violations?
The EPA has no formal drinking-water violations on file for Milano Wsc.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.