Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
1,995
health-based violations
2,271
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 486 µg/L 37% of the EPA limit 1300 µg/L
worst single sample: 653 µg/L | 126/130 | SYR4 | 2012–2018 |
| Arsenic | 20.5 µg/L 205% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 59.6 µg/L | 121/121 | SYR4 | 2012–2019 |
| Fluoride | 5720 µg/L 143% of the EPA limit, at the 95th percentile of samples — 4000 µg/L
worst single sample: 11000 µg/L | 121/121 | SYR4 | 2012–2019 |
| Nitrate | 5472.5 µg/L 55% of the EPA limit 10000 µg/L
worst single sample: 9490 µg/L | 106/106 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 5162 µg/L 52% of the EPA limit 10000 µg/L
worst single sample: 5560 µg/L | 37/37 | SYR4 | 2012–2015 |
| Lead | 3.1235 µg/L 21% of the EPA limit 15 µg/L
worst single sample: 5.2 µg/L | 22/130 | SYR4 | 2012–2018 |
| Bromoform | 13.65 µg/L No EPA limit set
worst single sample: 14.6 µg/L | 20/26 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 27.66 pCi/L No EPA limit set
worst single sample: 37.5 pCi/L | 17/17 | SYR4 | 2012–2014 |
| Total Haloacetic Acids (HAA5) | 13.9 µg/L 23% of the EPA limit 60 µg/L | 15/16 | SYR4 | 2013–2019 |
| Lead | 0.0013 mg/L 8.8% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| TTHM | 14.805 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 16.3 µg/L | 14/16 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.78 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 13/16 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 11.105 µg/L No EPA limit set
worst single sample: 12.7 µg/L | 12/16 | SYR4 | 2013–2019 |
| Barium | 51.025 µg/L 2.6% of the EPA limit 2000 µg/L
worst single sample: 55.3 µg/L | 10/10 | SYR4 | 2012–2017 |
| Combined Uranium | 61.805 µg/L 206% of the EPA limit, at the 95th percentile of samples — 30 µg/L
worst single sample: 65.9 µg/L | 10/10 | SYR4 | 2012–2014 |
| Selenium | 25.91 µg/L 52% of the EPA limit 50 µg/L
worst single sample: 27.8 µg/L | 10/10 | SYR4 | 2012–2017 |
| Nitrite | 157 µg/L 16% of the EPA limit 1000 µg/L
worst single sample: 160 µg/L | 7/37 | SYR4 | 2012–2015 |
| Chromium | 14.315 µg/L 14% of the EPA limit 100 µg/L
worst single sample: 16 µg/L | 6/10 | SYR4 | 2012–2017 |
| Dibromochloromethane | 1.6985 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 4/26 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 1.9 pCi/L 13% of the EPA limit 15 pCi/L
worst single sample: 2 pCi/L | 3/10 | SYR4 | 2012–2014 |
| Cyanide | 11.8445 µg/L 5.9% of the EPA limit 200 µg/L
worst single sample: 12.1 µg/L | 2/9 | SYR4 | 2014 |
| Chloroform | 1.4415 µg/L No EPA limit set
worst single sample: 1.47 µg/L | 2/26 | SYR4 | 2012–2019 |
| Picloram | 1.47215 µg/L 0.3% of the EPA limit 500 µg/L
worst single sample: 1.5 µg/L | 2/9 | SYR4 | 2012–2017 |
| Lithium | 132 µg/L No EPA limit set | 2/2 | UCMR-5 | 2023 |
| Antimony, Total | 0.5140 µg/L 8.6% of the EPA limit 6 µg/L | 1/10 | SYR4 | 2012–2017 |
| Bromodichloromethane | 1.5 µg/L No EPA limit set | 1/26 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.5300 pCi/L 11% of the EPA limit 5 pCi/L | 1/17 | SYR4 | 2012–2014 |
| Di(2-ethylhexyl) Phthalate | 0.5000 µg/L 8.3% of the EPA limit 6 µg/L | 1/11 | SYR4 | 2013–2019 |
| Thallium, Total | 0.2190 µg/L 11% of the EPA limit 2 µg/L | 1/10 | SYR4 | 2012–2017 |
| Toluene | 1.7 µg/L 0.2% of the EPA limit 1000 µg/L | 1/10 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.2 µg/L No EPA limit set | 1/16 | SYR4 | 2013–2019 |
78 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolSimazineStyreneTetrachloroethyleneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Wolfforth
Is City of Wolfforth tap water safe to drink?
EPA monitoring detected 31 contaminants in City of Wolfforth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Wolfforth's water?
EPA monitoring detected Copper, Arsenic, Fluoride, Nitrate, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.
How many people does City of Wolfforth serve?
City of Wolfforth reports serving 9,600 people in Texas, per its EPA record.
Has City of Wolfforth had any water quality violations?
The EPA has 2271 violations on file for City of Wolfforth, of which 1995 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.