Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
0
health-based violations
15
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2025-12-30 |
| MR | Monitoring | Resolved | 2025-12-30 |
| Other | Monitoring | Resolved | 2025-08-24 |
| Other | Monitoring | Resolved | 2025-08-24 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Archived | 2020-04-01 → 2020-06-30 |
| MR | Monitoring | Archived | 2020-04-01 → 2020-06-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0076 µg/L | 3/4 | 2024 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 22.47 µg/L No EPA limit set
worst single sample: 48 µg/L | 183/185 | SYR4 | 2012–2019 |
| Chloroform | 52.46 µg/L No EPA limit set
worst single sample: 89.1 µg/L | 177/185 | SYR4 | 2012–2019 |
| Dibromochloromethane | 19.205 µg/L No EPA limit set
worst single sample: 41.8 µg/L | 168/185 | SYR4 | 2012–2019 |
| TTHM | 77.13 µg/L 96% of the EPA limit 80 µg/L
worst single sample: 117 µg/L | 135/138 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 34.28 µg/L No EPA limit set
worst single sample: 40.1 µg/L | 134/135 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 49.045 µg/L 82% of the EPA limit 60 µg/L
worst single sample: 77.5 µg/L | 134/135 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 12.42 µg/L No EPA limit set
worst single sample: 17.5 µg/L | 129/135 | SYR4 | 2012–2019 |
| Nitrate | 397.05 µg/L 4% of the EPA limit 10000 µg/L
worst single sample: 435 µg/L | 120/124 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.92 µg/L No EPA limit set
worst single sample: 28.6 µg/L | 77/135 | SYR4 | 2012–2019 |
| Copper | 298 µg/L 23% of the EPA limit 1300 µg/L
worst single sample: 581 µg/L | 73/110 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.55 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 71/135 | SYR4 | 2012–2019 |
| Bromoform | 19.88 µg/L No EPA limit set
worst single sample: 28.6 µg/L | 65/185 | SYR4 | 2012–2019 |
| Fluoride | 1494 µg/L 37% of the EPA limit 4000 µg/L
worst single sample: 2170 µg/L | 32/32 | SYR4 | 2012–2019 |
| Barium | 73.2 µg/L 3.7% of the EPA limit 2000 µg/L
worst single sample: 79 µg/L | 27/27 | SYR4 | 2013–2019 |
| Lead | 34.79 µg/L 232% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 40.5 µg/L | 27/110 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 2.475 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 20/135 | SYR4 | 2012–2019 |
| Chromium | 3.69 µg/L 3.7% of the EPA limit 100 µg/L
worst single sample: 4.86 µg/L | 16/27 | SYR4 | 2013–2019 |
| Cyanide | 170 µg/L 85% of the EPA limit 200 µg/L
worst single sample: 184 µg/L | 15/26 | SYR4 | 2014–2019 |
| Xylenes, Total | 44.23 µg/L 0.4% of the EPA limit 10000 µg/L
worst single sample: 108 µg/L | 15/50 | SYR4 | 2012–2019 |
| Arsenic | 1.9805 µg/L 20% of the EPA limit 10 µg/L
worst single sample: 2 µg/L | 14/27 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Nitrate-Nitrite | 348.65 µg/L 3.5% of the EPA limit 10000 µg/L
worst single sample: 368 µg/L | 10/11 | SYR4 | 2012–2019 |
| Ethylbenzene | 12.5 µg/L 1.8% of the EPA limit 700 µg/L
worst single sample: 18.8 µg/L | 9/50 | SYR4 | 2012–2019 |
| Atrazine | 0.2130 µg/L 7.1% of the EPA limit 3 µg/L
worst single sample: 0.2200 µg/L | 8/54 | SYR4 | 2012–2019 |
| Simazine | 0.1940 µg/L 4.9% of the EPA limit 4 µg/L
worst single sample: 0.2000 µg/L | 7/54 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 2.075 µg/L 35% of the EPA limit 6 µg/L
worst single sample: 2.4 µg/L | 6/54 | SYR4 | 2012–2019 |
| 2,4-D | 0.5888 µg/L 0.8% of the EPA limit 70 µg/L
worst single sample: 0.6340 µg/L | 3/29 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.652 pCi/L 53% of the EPA limit 5 pCi/L
worst single sample: 2.78 pCi/L | 3/3 | SYR4 | 2015–2017 |
| Gross Beta Particle Activity | 6.38 pCi/L No EPA limit set
worst single sample: 6.4 pCi/L | 3/8 | SYR4 | 2014–2017 |
| Nitrite | 67.55 µg/L 6.8% of the EPA limit 1000 µg/L
worst single sample: 69.5 µg/L | 2/13 | SYR4 | 2012–2019 |
| Antimony, Total | 0.2000 µg/L 3.3% of the EPA limit 6 µg/L | 1/27 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 3 pCi/L 20% of the EPA limit 15 pCi/L | 1/8 | SYR4 | 2014–2017 |
| Mercury | 0.2230 µg/L 11% of the EPA limit 2 µg/L | 1/27 | SYR4 | 2013–2019 |
| Selenium | 3.09 µg/L 6.2% of the EPA limit 50 µg/L | 1/27 | SYR4 | 2013–2019 |
| Toluene | 1.02 µg/L 0.1% of the EPA limit 1000 µg/L | 1/50 | SYR4 | 2012–2019 |
73 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorNetfosaaNfdhaNmefosaaOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Cleburne
Is City of Cleburne tap water safe to drink?
EPA monitoring detected 36 contaminants in City of Cleburne's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Cleburne's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Cleburne serve?
City of Cleburne reports serving 34,075 people in Texas, per its EPA record.
Has City of Cleburne had any water quality violations?
The EPA has 15 violations on file for City of Cleburne, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.