Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 13.56 µg/L No EPA limit set
worst single sample: 19.2 µg/L | 69/69 | SYR4 | 2012–2019 |
| Chloroform | 36.04 µg/L No EPA limit set
worst single sample: 48 µg/L | 69/69 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 33.44 µg/L No EPA limit set
worst single sample: 46 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 47.675 µg/L 60% of the EPA limit 80 µg/L
worst single sample: 77 µg/L | 62/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 47.46 µg/L 79% of the EPA limit 60 µg/L
worst single sample: 65.4 µg/L | 62/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10.1 µg/L No EPA limit set
worst single sample: 16.5 µg/L | 61/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.275 µg/L No EPA limit set
worst single sample: 7.9 µg/L | 56/69 | SYR4 | 2012–2019 |
| Copper | 311.3 µg/L 24% of the EPA limit 1300 µg/L
worst single sample: 326 µg/L | 48/62 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.9 µg/L No EPA limit set
worst single sample: 2 µg/L | 31/62 | SYR4 | 2012–2019 |
| Nitrate | 538.5 µg/L 5.4% of the EPA limit 10000 µg/L
worst single sample: 570 µg/L | 30/30 | SYR4 | 2012–2019 |
| Lead | 1.5425 µg/L 10% of the EPA limit 15 µg/L
worst single sample: 1.59 µg/L | 20/62 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 10.07 µg/L No EPA limit set
worst single sample: 13.3 µg/L | 20/62 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2024 |
| Nitrate-Nitrite | 549 µg/L 5.5% of the EPA limit 10000 µg/L
worst single sample: 570 µg/L | 7/7 | SYR4 | 2012–2015 |
| Bromoform | 2.17 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 4/69 | SYR4 | 2012–2019 |
| Atrazine | 0.1190 µg/L 4% of the EPA limit 3 µg/L
worst single sample: 0.1200 µg/L | 2/2 | SYR4 | 2014–2017 |
| Barium | 74.55 µg/L 3.7% of the EPA limit 2000 µg/L
worst single sample: 76.3 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 558.5 µg/L 14% of the EPA limit 4000 µg/L
worst single sample: 570 µg/L | 2/2 | SYR4 | 2014–2017 |
| Arsenic | 2.7 µg/L 27% of the EPA limit 10 µg/L | 1/2 | SYR4 | 2014–2017 |
| Cyanide | 20 µg/L 10% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 4.3 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
| Monobromoacetic Acid | 1.2 µg/L No EPA limit set | 1/62 | SYR4 | 2012–2019 |
| Nitrite | 10 µg/L 1% of the EPA limit 1000 µg/L | 1/7 | SYR4 | 2012–2015 |
80 contaminants tested, none detected
Utility contact
Frequently asked questions about Harris County Mud 285
Is Harris County Mud 285 tap water safe to drink?
EPA monitoring detected 28 contaminants in Harris County Mud 285's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harris County Mud 285's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Harris County Mud 285 serve?
Harris County Mud 285 reports serving 14,268 people in Texas, per its EPA record.
Has Harris County Mud 285 had any water quality violations?
The EPA has no formal drinking-water violations on file for Harris County Mud 285.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.