Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
0
health-based violations
11
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2024-07-02 |
| Other | Monitoring | Resolved | 2024-07-02 |
| MR | Monitoring | Resolved | 2013-12-30 |
| Other | Monitoring | Resolved | 2008-10-20 |
| MR | Monitoring | Resolved | 2008-06-01 → 2008-06-30 |
| MR | Monitoring | Resolved | 2008-05-01 → 2008-05-31 |
| MR | Monitoring | Resolved | 2008-05-01 → 2008-05-31 |
| MR | Monitoring | Resolved | 2008-05-01 → 2008-05-31 |
| MR | Monitoring | Resolved | 1992-07-01 → 1993-06-30 |
| MR | Monitoring | Archived | 1991-09-01 → 1991-09-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfpea | 0.0030 µg/L | 1/12 | 2024 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 21.5 µg/L No EPA limit set
worst single sample: 25.4 µg/L | 115/138 | SYR4 | 2012–2019 |
| TTHM | 24.66 µg/L 31% of the EPA limit 80 µg/L
worst single sample: 55 µg/L | 113/124 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 28 µg/L No EPA limit set
worst single sample: 31.7 µg/L | 112/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 33.195 µg/L 55% of the EPA limit 60 µg/L
worst single sample: 39.4 µg/L | 112/124 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.94 µg/L No EPA limit set
worst single sample: 17.2 µg/L | 104/138 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.7 µg/L No EPA limit set
worst single sample: 5.7 µg/L | 101/124 | SYR4 | 2012–2019 |
| Copper | 163.9 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 508 µg/L | 92/95 | SYR4 | 2013–2017 |
| Nitrate | 950 µg/L 9.5% of the EPA limit 10000 µg/L
worst single sample: 1100 µg/L | 58/60 | SYR4 | 2012–2019 |
| Lead | 9.9575 µg/L 66% of the EPA limit 15 µg/L
worst single sample: 17.8 µg/L | 40/95 | SYR4 | 2013–2017 |
| Monochloroacetic Acid | 4.075 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 36/124 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Dibromochloromethane | 11.85 µg/L No EPA limit set
worst single sample: 17.3 µg/L | 11/138 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 930 µg/L 9.3% of the EPA limit 10000 µg/L
worst single sample: 950 µg/L | 9/9 | SYR4 | 2012–2015 |
| Barium | 277.25 µg/L 14% of the EPA limit 2000 µg/L
worst single sample: 279 µg/L | 8/8 | SYR4 | 2014–2019 |
| Lithium | 18.7 µg/L No EPA limit set | 8/12 | UCMR-5 | 2024 |
| Fluoride | 757 µg/L 19% of the EPA limit 4000 µg/L
worst single sample: 760 µg/L | 7/8 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 4.195 pCi/L 84% of the EPA limit 5 pCi/L
worst single sample: 4.36 pCi/L | 6/6 | SYR4 | 2013–2019 |
| Atrazine | 0.6380 µg/L 21% of the EPA limit 3 µg/L
worst single sample: 0.6500 µg/L | 5/22 | SYR4 | 2012–2019 |
| Bromoform | 2.91 µg/L No EPA limit set
worst single sample: 3 µg/L | 4/138 | SYR4 | 2012–2019 |
| Cyanide | 72.5 µg/L 36% of the EPA limit 200 µg/L
worst single sample: 80 µg/L | 4/6 | SYR4 | 2014–2017 |
| Nitrite | 395 µg/L 40% of the EPA limit 1000 µg/L
worst single sample: 440 µg/L | 4/9 | SYR4 | 2012–2015 |
| Dibromoacetic Acid | 3.9 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 3/124 | SYR4 | 2012–2019 |
| Arsenic | 4.5 µg/L 45% of the EPA limit 10 µg/L | 2/8 | SYR4 | 2014–2019 |
| Combined Uranium | 1.495 µg/L 5% of the EPA limit 30 µg/L
worst single sample: 1.5 µg/L | 2/4 | SYR4 | 2016–2019 |
| Di(2-ethylhexyl) Phthalate | 2.9 µg/L 48% of the EPA limit 6 µg/L | 1/22 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 2 pCi/L 13% of the EPA limit 15 pCi/L | 1/4 | SYR4 | 2016–2019 |
| Gross Beta Particle Activity | 4.2 pCi/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Simazine | 0.1900 µg/L 4.8% of the EPA limit 4 µg/L | 1/22 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/14 | SYR4 | 2015–2019 |
79 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Bridgestone Mud
Is Bridgestone Mud tap water safe to drink?
EPA monitoring detected 30 contaminants in Bridgestone Mud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bridgestone Mud's water?
EPA monitoring detected Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Bridgestone Mud serve?
Bridgestone Mud reports serving 24,528 people in Texas, per its EPA record.
Has Bridgestone Mud had any water quality violations?
The EPA has 11 violations on file for Bridgestone Mud, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.