Compliance record
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 65.5 µg/L 5% of the EPA limit 1300 µg/L
worst single sample: 120 µg/L | 36/42 | SYR4 | 2012–2018 |
| Dibromochloromethane | 4 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 16/19 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.19 µg/L No EPA limit set
worst single sample: 11.1 µg/L | 15/19 | SYR4 | 2012–2019 |
| Chloroform | 29.98 µg/L No EPA limit set
worst single sample: 36 µg/L | 15/19 | SYR4 | 2012–2019 |
| Lead | 2.54 µg/L 17% of the EPA limit 15 µg/L
worst single sample: 2.75 µg/L | 13/42 | SYR4 | 2012–2018 |
| Nitrate | 860 µg/L 8.6% of the EPA limit 10000 µg/L | 12/16 | SYR4 | 2012–2019 |
| TTHM | 36.45 µg/L 46% of the EPA limit 80 µg/L
worst single sample: 40.3 µg/L | 11/13 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 30.79 µg/L No EPA limit set
worst single sample: 32.5 µg/L | 10/13 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 41.415 µg/L 69% of the EPA limit 60 µg/L
worst single sample: 43.8 µg/L | 10/13 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 9.415 µg/L No EPA limit set
worst single sample: 10 µg/L | 10/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.62 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 9/13 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| Lithium | 32.3 µg/L No EPA limit set | 6/8 | UCMR-5 | 2025 |
| Barium | 155.39 µg/L 7.8% of the EPA limit 2000 µg/L
worst single sample: 165 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromoform | 2.74 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 3/19 | SYR4 | 2012–2019 |
| Fluoride | 600 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 620 µg/L | 3/3 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.49 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 3/13 | SYR4 | 2012–2019 |
| Arsenic | 2.4 µg/L 24% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Atrazine | 0.2700 µg/L 9% of the EPA limit 3 µg/L | 1/2 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Combined Uranium | 1.1 µg/L 3.7% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2015 |
| Gross Beta Particle Activity | 5.3 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Nitrate-Nitrite | 100 µg/L 1% of the EPA limit 10000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Selenium | 4.9 µg/L 9.8% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Simazine | 0.2100 µg/L 5.3% of the EPA limit 4 µg/L | 1/2 | SYR4 | 2014–2017 |
81 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Fort Bend County Mud 58
Is Fort Bend County Mud 58 tap water safe to drink?
EPA monitoring detected 28 contaminants in Fort Bend County Mud 58's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 58's water?
EPA monitoring detected Copper, Dibromochloromethane, Bromodichloromethane, Chloroform, Lead, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 58 serve?
Fort Bend County Mud 58 reports serving 10,629 people in Texas, per its EPA record.
Has Fort Bend County Mud 58 had any water quality violations?
The EPA has no formal drinking-water violations on file for Fort Bend County Mud 58.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.