Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-12-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 66.875 µg/L 5.1% of the EPA limit 1300 µg/L
worst single sample: 204 µg/L | 46/64 | SYR4 | 2013–2019 |
| Nitrate | 670.5 µg/L 6.7% of the EPA limit 10000 µg/L
worst single sample: 720 µg/L | 32/32 | SYR4 | 2012–2019 |
| Bromodichloromethane | 12.79 µg/L No EPA limit set
worst single sample: 19.9 µg/L | 19/19 | SYR4 | 2013–2019 |
| Chloroform | 25 µg/L No EPA limit set
worst single sample: 26.8 µg/L | 19/19 | SYR4 | 2013–2019 |
| Dibromochloromethane | 8.09 µg/L No EPA limit set
worst single sample: 9.8 µg/L | 19/19 | SYR4 | 2013–2019 |
| Atrazine | 0.2340 µg/L 7.8% of the EPA limit 3 µg/L
worst single sample: 0.2500 µg/L | 9/11 | SYR4 | 2013–2019 |
| Lead | 7.662 µg/L 51% of the EPA limit 15 µg/L
worst single sample: 7.86 µg/L | 7/64 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.075 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 31.375 µg/L No EPA limit set
worst single sample: 31.6 µg/L | 6/6 | SYR4 | 2014–2019 |
| TTHM | 52.175 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 57.7 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 43.7 µg/L 73% of the EPA limit 60 µg/L
worst single sample: 44 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 9.775 µg/L No EPA limit set
worst single sample: 10.2 µg/L | 6/6 | SYR4 | 2014–2019 |
| Barium | 102.04 µg/L 5.1% of the EPA limit 2000 µg/L
worst single sample: 106 µg/L | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 414 µg/L 10% of the EPA limit 4000 µg/L
worst single sample: 420 µg/L | 5/5 | SYR4 | 2013–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2025 |
| Cyanide | 148 µg/L 74% of the EPA limit 200 µg/L
worst single sample: 160 µg/L | 4/5 | SYR4 | 2013–2019 |
| Combined Uranium | 1.74 µg/L 5.8% of the EPA limit 30 µg/L
worst single sample: 1.8 µg/L | 4/5 | SYR4 | 2013–2019 |
| Bromoform | 6.08 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 3/19 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 6.01 pCi/L No EPA limit set
worst single sample: 6.1 pCi/L | 3/5 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 511 µg/L 5.1% of the EPA limit 10000 µg/L
worst single sample: 530 µg/L | 3/3 | SYR4 | 2012–2015 |
| Simazine | 0.1000 µg/L 2.5% of the EPA limit 4 µg/L | 3/11 | SYR4 | 2013–2019 |
| Lithium | 9.7 µg/L No EPA limit set | 2/6 | UCMR-5 | 2025 |
| Combined Radium (-226 And -228) | 2.3 pCi/L 46% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 1 pCi/L 6.7% of the EPA limit 15 pCi/L | 1/5 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 5 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 146
Is Fort Bend County Mud 146 tap water safe to drink?
EPA monitoring detected 27 contaminants in Fort Bend County Mud 146's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 146's water?
EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 146 serve?
Fort Bend County Mud 146 reports serving 5,985 people in Texas, per its EPA record.
Has Fort Bend County Mud 146 had any water quality violations?
The EPA has 1 violation on file for Fort Bend County Mud 146, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.