Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 272.4 µg/L 21% of the EPA limit 1300 µg/L
worst single sample: 799 µg/L | 57/62 | SYR4 | 2012–2019 |
| Lead | 20.64 µg/L 138% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 56 µg/L | 27/62 | SYR4 | 2012–2019 |
| Nitrate | 820 µg/L 8.2% of the EPA limit 10000 µg/L | 18/22 | SYR4 | 2012–2019 |
| Lead | 0.0042 mg/L 28% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Bromodichloromethane | 13.83 µg/L No EPA limit set
worst single sample: 15 µg/L | 10/12 | SYR4 | 2013–2019 |
| Chloroform | 28.155 µg/L No EPA limit set
worst single sample: 29.1 µg/L | 10/12 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.88 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 10/12 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.9 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 6/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 28.65 µg/L No EPA limit set
worst single sample: 28.7 µg/L | 6/7 | SYR4 | 2013–2019 |
| TTHM | 40.05 µg/L 50% of the EPA limit 80 µg/L
worst single sample: 40.6 µg/L | 6/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 41.025 µg/L 68% of the EPA limit 60 µg/L
worst single sample: 41.7 µg/L | 6/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 11.075 µg/L No EPA limit set
worst single sample: 11.8 µg/L | 6/7 | SYR4 | 2013–2019 |
| Bromoform | 1.78 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 5/12 | SYR4 | 2013–2019 |
| Atrazine | 0.3285 µg/L 11% of the EPA limit 3 µg/L
worst single sample: 0.3300 µg/L | 4/6 | SYR4 | 2015–2019 |
| Barium | 177.9 µg/L 8.9% of the EPA limit 2000 µg/L
worst single sample: 182 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 307 µg/L 7.7% of the EPA limit 4000 µg/L
worst single sample: 310 µg/L | 3/3 | SYR4 | 2012–2018 |
| Cyanide | 128.5 µg/L 64% of the EPA limit 200 µg/L
worst single sample: 130 µg/L | 2/2 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 275.5 µg/L 2.8% of the EPA limit 10000 µg/L
worst single sample: 280 µg/L | 2/3 | SYR4 | 2013–2019 |
| Simazine | 0.0990 µg/L 2.5% of the EPA limit 4 µg/L
worst single sample: 0.1000 µg/L | 2/6 | SYR4 | 2015–2019 |
| Lithium | 10.5 µg/L No EPA limit set | 2/3 | UCMR-5 | 2025 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Combined Uranium | 1.6 µg/L 5.3% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2015 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 34
Is Fort Bend County Mud 34 tap water safe to drink?
EPA monitoring detected 28 contaminants in Fort Bend County Mud 34's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 34's water?
EPA monitoring detected Copper, Lead, Nitrate, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 34 serve?
Fort Bend County Mud 34 reports serving 5,367 people in Texas, per its EPA record.
Has Fort Bend County Mud 34 had any water quality violations?
The EPA has no formal drinking-water violations on file for Fort Bend County Mud 34.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.