Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
32
health-based violations
65
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2016-10-01 → 2016-10-31 |
| TT | Health-based | Resolved | 2016-10-01 → 2016-10-31 |
| TT | Health-based | Resolved | 2016-10-01 → 2016-10-31 |
| TT | Health-based | Resolved | 2016-10-01 → 2016-10-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 625 µg/L 63% of the EPA limit 1000 µg/L
worst single sample: 980 µg/L | 211/259 | SYR4 | 2013–2019 |
| Bromodichloromethane | 16.79 µg/L No EPA limit set
worst single sample: 33 µg/L | 99/100 | SYR4 | 2012–2019 |
| Bromoform | 42.35 µg/L No EPA limit set
worst single sample: 60.4 µg/L | 99/100 | SYR4 | 2012–2019 |
| Chloroform | 8.4 µg/L No EPA limit set
worst single sample: 18 µg/L | 99/100 | SYR4 | 2012–2019 |
| Dibromochloromethane | 31.19 µg/L No EPA limit set
worst single sample: 47 µg/L | 99/100 | SYR4 | 2012–2019 |
| Copper | 142.5 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 381 µg/L | 96/96 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 17.12 µg/L No EPA limit set
worst single sample: 22.6 µg/L | 90/90 | SYR4 | 2013–2019 |
| TTHM | 91.3 µg/L 114% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 125 µg/L | 90/90 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 32.04 µg/L 53% of the EPA limit 60 µg/L
worst single sample: 40.9 µg/L | 90/90 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 11.4 µg/L No EPA limit set
worst single sample: 12.6 µg/L | 87/90 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.79 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 83/90 | SYR4 | 2013–2019 |
| Nitrate | 490 µg/L 4.9% of the EPA limit 10000 µg/L
worst single sample: 520 µg/L | 26/26 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 8.06 µg/L No EPA limit set
worst single sample: 9.1 µg/L | 14/90 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Fluoride | 475 µg/L 12% of the EPA limit 4000 µg/L
worst single sample: 500 µg/L | 11/11 | SYR4 | 2012–2019 |
| Lead | 4.637 µg/L 31% of the EPA limit 15 µg/L
worst single sample: 4.7 µg/L | 10/96 | SYR4 | 2013–2019 |
| Barium | 159.05 µg/L 8% of the EPA limit 2000 µg/L
worst single sample: 165 µg/L | 8/8 | SYR4 | 2013–2019 |
| Lithium | 49.3 µg/L No EPA limit set | 8/8 | UCMR-5 | 2025 |
| Selenium | 4.95 µg/L 9.9% of the EPA limit 50 µg/L
worst single sample: 5.1 µg/L | 7/8 | SYR4 | 2013–2019 |
| Cyanide | 120 µg/L 60% of the EPA limit 200 µg/L
worst single sample: 140 µg/L | 6/6 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 1.653 µg/L 28% of the EPA limit 6 µg/L
worst single sample: 1.68 µg/L | 4/16 | SYR4 | 2012–2019 |
| Arsenic | 2.1 µg/L 21% of the EPA limit 10 µg/L | 2/8 | SYR4 | 2013–2019 |
| Atrazine | 0.1475 µg/L 4.9% of the EPA limit 3 µg/L
worst single sample: 0.1500 µg/L | 2/16 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 9.315 µg/L No EPA limit set
worst single sample: 9.4 µg/L | 2/90 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.3 pCi/L 46% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2012 |
| Dichloromethane | 1.2 µg/L 24% of the EPA limit 5 µg/L | 1/10 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Adipate | 1.78 µg/L 0.4% of the EPA limit 400 µg/L | 1/16 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 7.3 pCi/L No EPA limit set | 1/2 | SYR4 | 2012–2017 |
75 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDalaponDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPFBSPfdaPfdoaPfeesaPfhpsPfmbaPfmpaPFNAPFOAPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of San Benito
Is City of San Benito tap water safe to drink?
EPA monitoring detected 34 contaminants in City of San Benito's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of San Benito's water?
EPA monitoring detected Chlorite, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does City of San Benito serve?
City of San Benito reports serving 24,250 people in Texas, per its EPA record.
Has City of San Benito had any water quality violations?
The EPA has 65 violations on file for City of San Benito, of which 32 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.