Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
204
health-based violations
493
violations on file
12
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 608.5 µg/L 47% of the EPA limit 1300 µg/L
worst single sample: 2800 µg/L | 310/322 | SYR4 | 2013–2019 |
| Chlorite | 768.5 µg/L 77% of the EPA limit 1000 µg/L
worst single sample: 990 µg/L | 224/228 | SYR4 | 2013–2019 |
| Bromodichloromethane | 30.1 µg/L No EPA limit set
worst single sample: 42.9 µg/L | 140/140 | SYR4 | 2012–2019 |
| Chloroform | 34.1 µg/L No EPA limit set
worst single sample: 92.6 µg/L | 140/140 | SYR4 | 2012–2019 |
| Dibromochloromethane | 36.215 µg/L No EPA limit set
worst single sample: 41.4 µg/L | 140/140 | SYR4 | 2012–2019 |
| Lead | 11.8 µg/L 79% of the EPA limit 15 µg/L
worst single sample: 100 µg/L | 133/322 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 26.525 µg/L No EPA limit set
worst single sample: 42.2 µg/L | 128/128 | SYR4 | 2012–2019 |
| TTHM | 115.55 µg/L 144% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 161 µg/L | 128/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 97.325 µg/L 162% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 246 µg/L | 128/128 | SYR4 | 2012–2019 |
| Bromoform | 50.14 µg/L No EPA limit set
worst single sample: 72.9 µg/L | 125/140 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 76.97 µg/L No EPA limit set
worst single sample: 169.4 µg/L | 124/128 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 13.81 µg/L No EPA limit set
worst single sample: 51.3 µg/L | 124/128 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 8.84 µg/L No EPA limit set
worst single sample: 9.8 µg/L | 53/128 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 19.1 µg/L No EPA limit set
worst single sample: 19.3 µg/L | 26/128 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2025 |
| Nitrate | 1362.5 µg/L 14% of the EPA limit 10000 µg/L
worst single sample: 1410 µg/L | 22/22 | SYR4 | 2012–2019 |
| Barium | 141.7 µg/L 7.1% of the EPA limit 2000 µg/L
worst single sample: 148 µg/L | 8/8 | SYR4 | 2013–2019 |
| Fluoride | 669.5 µg/L 17% of the EPA limit 4000 µg/L
worst single sample: 680 µg/L | 8/9 | SYR4 | 2012–2019 |
| Cyanide | 137.5 µg/L 69% of the EPA limit 200 µg/L
worst single sample: 140 µg/L | 6/7 | SYR4 | 2014–2019 |
| Lithium | 47.8 µg/L No EPA limit set | 6/6 | UCMR-5 | 2025 |
| Selenium | 6.96 µg/L 14% of the EPA limit 50 µg/L
worst single sample: 7.1 µg/L | 5/8 | SYR4 | 2013–2019 |
| Dalapon | 2.085 µg/L 1% of the EPA limit 200 µg/L
worst single sample: 2.1 µg/L | 4/120 | SYR4 | 2012–2019 |
| Arsenic | 3.53 µg/L 35% of the EPA limit 10 µg/L
worst single sample: 3.6 µg/L | 3/8 | SYR4 | 2013–2019 |
| Atrazine | 0.8290 µg/L 28% of the EPA limit 3 µg/L
worst single sample: 0.9100 µg/L | 3/12 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 8.285 pCi/L No EPA limit set
worst single sample: 8.4 pCi/L | 2/2 | SYR4 | 2017–2019 |
| Simazine | 0.1770 µg/L 4.4% of the EPA limit 4 µg/L
worst single sample: 0.1800 µg/L | 2/12 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2017 |
| Xylenes, Total | 1.1 µg/L 0% of the EPA limit 10000 µg/L | 1/12 | SYR4 | 2012–2019 |
77 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Beeville
Is City of Beeville tap water safe to drink?
EPA monitoring detected 32 contaminants in City of Beeville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Beeville's water?
EPA monitoring detected Copper, Chlorite, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does City of Beeville serve?
City of Beeville reports serving 13,664 people in Texas, per its EPA record.
Has City of Beeville had any water quality violations?
The EPA has 493 violations on file for City of Beeville, of which 204 are health-based (a contaminant limit or required treatment was breached) and 12 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.