← South Carolina

Tap water quality report

Mullins City of (sc3310002)

EPA monitoring tested this supplier for 108 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
18
detected
7,366
people served
10
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Marion

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

10
health-based violations
26
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2001-09-01 → 2001-09-30
MCL Health-based Resolved 2001-09-01 → 2001-09-30
MCL Health-based Resolved 2001-09-01 → 2001-09-30
MCL Health-based Archived 2000-07-01 → 2000-07-31
MCL Health-based Archived 2000-07-01 → 2000-07-31
MCL Health-based Archived 1998-07-01 → 1998-07-31
MCL Health-based Resolved 1997-08-01 → 1997-08-31
MCL Health-based Resolved 1997-08-01 → 1997-08-31
MCL Health-based Resolved 1997-08-01 → 1997-08-31
MCL Health-based Resolved 1997-08-01 → 1997-08-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
353 µg/L 27%
of the EPA limit 1300 µg/L
worst single sample: 420 µg/L
59/60 SYR4 2013–2019
Lead
25 µg/L 167%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 150 µg/L
31/60 SYR4 2013–2019
Lead
0.00085 mg/L 5.7%
of the EPA limit 0.0150 mg/L
17/17 LCR 2025
Fluoride
726 µg/L 18%
of the EPA limit 4000 µg/L
worst single sample: 740 µg/L
15/15 SYR4 2013–2019
Nitrate
240 µg/L 2.4%
of the EPA limit 10000 µg/L
12/82 SYR4 2012–2019
Bromodichloromethane
9.834 µg/L
No EPA limit set
worst single sample: 9.99 µg/L
7/7 SYR4 2013–2019
Chloroform
30.757 µg/L
No EPA limit set
worst single sample: 37 µg/L
7/7 SYR4 2013–2019
Dibromochloromethane
4.95 µg/L
No EPA limit set
worst single sample: 5.1 µg/L
7/7 SYR4 2013–2019
TTHM
42.69 µg/L 53%
of the EPA limit 80 µg/L
worst single sample: 48 µg/L
7/7 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
10.827 µg/L 18%
of the EPA limit 60 µg/L
worst single sample: 11.19 µg/L
7/7 SYR4 2013–2019
Monobromoacetic Acid
4.995 µg/L
No EPA limit set
worst single sample: 5.14 µg/L
6/7 SYR4 2013–2019
Dichloroacetic Acid
3.382 µg/L
No EPA limit set
worst single sample: 3.57 µg/L
5/7 SYR4 2013–2019
Trichloroacetic Acid
2.934 µg/L
No EPA limit set
worst single sample: 3 µg/L
5/7 SYR4 2013–2019
Dibromoacetic Acid
2.192 µg/L
No EPA limit set
worst single sample: 2.23 µg/L
2/7 SYR4 2013–2019
Combined Radium (-226 And -228)
0.1200 pCi/L 2.4%
of the EPA limit 5 pCi/L
1/9 SYR4 2013–2019
Gross Beta Particle Activity
4.2 pCi/L
No EPA limit set
1/4 SYR4 2019
Nitrate-Nitrite
22 µg/L 0.2%
of the EPA limit 10000 µg/L
1/6 SYR4 2013–2018
Xylenes, Total
1.15 µg/L 0%
of the EPA limit 10000 µg/L
1/10 SYR4 2013–2016
90 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
LEWIS, WADE
Phone
843-234-8989
Email
[email protected]; [email protected]; [email protected]; [email protected]

Frequently asked questions about Mullins City of (sc3310002)

Is Mullins City of (sc3310002) tap water safe to drink?

EPA monitoring detected 18 contaminants in Mullins City of (sc3310002)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Mullins City of (sc3310002)'s water?

EPA monitoring detected Copper, Lead, Lead, Fluoride, Nitrate, and others. The full list with the level and data source for each is above.

How many people does Mullins City of (sc3310002) serve?

Mullins City of (sc3310002) reports serving 7,366 people in South Carolina, per its EPA record.

Has Mullins City of (sc3310002) had any water quality violations?

The EPA has 26 violations on file for Mullins City of (sc3310002), of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.