← Pennsylvania

Tap water quality report

Wilkinsburg-Penn Jt Water Auth

EPA monitoring tested this supplier for 108 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
18
detected
125,000
people served
29
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Allegheny

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

29
health-based violations
161
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2024-10-01 → 2024-12-31
MCL Health-based Resolved 2024-10-01 → 2024-12-31
MCL Health-based Resolved 2024-10-01 → 2024-12-31
MCL Health-based Resolved 2024-10-01 → 2024-12-31
MCL Health-based Resolved 2024-10-01 → 2024-12-31
TT Health-based Resolved 2014-10-01 → 2014-12-31
TT Health-based Resolved 2014-10-01 → 2014-12-31
TT Health-based Resolved 2014-10-01 → 2014-12-31
TT Health-based Resolved 2014-10-01 → 2014-12-31
TT Health-based Resolved 2014-07-01 → 2014-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Dibromochloromethane
20.8 µg/L
No EPA limit set
worst single sample: 27.4 µg/L
265/268 SYR4 2012–2019
Bromodichloromethane
28.89 µg/L
No EPA limit set
worst single sample: 34 µg/L
252/252 SYR4 2012–2019
Chloroform
67.19 µg/L
No EPA limit set
worst single sample: 91.4 µg/L
252/252 SYR4 2012–2019
TTHM
94.09 µg/L 118%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 118 µg/L
252/252 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
42 µg/L 70%
of the EPA limit 60 µg/L
worst single sample: 59 µg/L
216/252 SYR4 2012–2019
Copper
150.4 µg/L 12%
of the EPA limit 1300 µg/L
worst single sample: 326 µg/L
149/157 SYR4 2013–2019
Lead
27.2 µg/L 181%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 48 µg/L
86/157 SYR4 2013–2019
Bromoform
7.8215 µg/L
No EPA limit set
worst single sample: 10.1 µg/L
80/252 SYR4 2012–2019
Dichloroacetic Acid
13.7 µg/L
No EPA limit set
worst single sample: 18.2 µg/L
40/40 SYR4 2018–2019
Trichloroacetic Acid
14.2 µg/L
No EPA limit set
worst single sample: 16.4 µg/L
39/40 SYR4 2018–2019
Nitrate
750 µg/L 7.5%
of the EPA limit 10000 µg/L
18/20 SYR4 2012–2019
Lead
0.0098 mg/L 65%
of the EPA limit 0.0150 mg/L
13/13 LCR 2025
Fluoride
889.2 µg/L 22%
of the EPA limit 4000 µg/L
worst single sample: 902 µg/L
9/9 SYR4 2012–2019
Monochloroacetic Acid
10.748 µg/L
No EPA limit set
worst single sample: 11.2 µg/L
5/40 SYR4 2018–2019
Barium
40.8 µg/L 2%
of the EPA limit 2000 µg/L
worst single sample: 42 µg/L
4/8 SYR4 2012–2019
Dibromoacetic Acid
1.19 µg/L
No EPA limit set
1/40 SYR4 2018–2019
Mercury
0.3000 µg/L 15%
of the EPA limit 2 µg/L
1/9 SYR4 2012–2019
Nitrite
120 µg/L 12%
of the EPA limit 1000 µg/L
1/10 SYR4 2012–2019
90 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BRIAN BIANCHI
Phone
412-243-6200

Frequently asked questions about Wilkinsburg-Penn Jt Water Auth

Is Wilkinsburg-Penn Jt Water Auth tap water safe to drink?

EPA monitoring detected 18 contaminants in Wilkinsburg-Penn Jt Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wilkinsburg-Penn Jt Water Auth's water?

EPA monitoring detected Dibromochloromethane, Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Wilkinsburg-Penn Jt Water Auth serve?

Wilkinsburg-Penn Jt Water Auth reports serving 125,000 people in Pennsylvania, per its EPA record.

Has Wilkinsburg-Penn Jt Water Auth had any water quality violations?

The EPA has 161 violations on file for Wilkinsburg-Penn Jt Water Auth, of which 29 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.