← Oklahoma

Tap water quality report

Henryetta Municipal Authority

EPA monitoring tested this supplier for 82 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

82
contaminants tested
18
detected
6,096
people served
778
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Okmulgee

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

778
health-based violations
815
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfpea 0.0058 µg/L 1/4 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
16.4 µg/L
No EPA limit set
worst single sample: 18.2 µg/L
88/88 SYR4 2012–2019
Chloroform
71.84 µg/L
No EPA limit set
worst single sample: 80.7 µg/L
88/88 SYR4 2012–2019
Dichloroacetic Acid
27.33 µg/L
No EPA limit set
worst single sample: 32.9 µg/L
88/88 SYR4 2012–2019
TTHM
89.655 µg/L 112%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 100.5 µg/L
88/88 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
50.935 µg/L 85%
of the EPA limit 60 µg/L
worst single sample: 54.6 µg/L
88/88 SYR4 2012–2019
Trichloroacetic Acid
25.59 µg/L
No EPA limit set
worst single sample: 29.4 µg/L
87/88 SYR4 2012–2019
Dibromochloromethane
4.722 µg/L
No EPA limit set
worst single sample: 5.27 µg/L
85/88 SYR4 2012–2019
Copper
45.2 µg/L 3.5%
of the EPA limit 1300 µg/L
worst single sample: 53.69 µg/L
29/40 SYR4 2014–2017
Nitrate-Nitrite
450 µg/L 4.5%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Lead
0.0015 mg/L 10%
of the EPA limit 0.0150 mg/L
13/13 LCR 2023
Lead
32.24 µg/L 215%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 36.98 µg/L
11/40 SYR4 2014–2017
Monochloroacetic Acid
2.9185 µg/L
No EPA limit set
worst single sample: 3.31 µg/L
10/88 SYR4 2012–2019
Dibromoacetic Acid
1.349 µg/L
No EPA limit set
worst single sample: 1.37 µg/L
7/88 SYR4 2012–2019
Gross Beta Particle Activity
2.567 pCi/L
No EPA limit set
worst single sample: 2.6 pCi/L
2/2 SYR4 2013–2019
Monobromoacetic Acid
2.4935 µg/L
No EPA limit set
worst single sample: 2.5 µg/L
2/88 SYR4 2012–2019
Barium
56 µg/L 2.8%
of the EPA limit 2000 µg/L
1/1 SYR4 2012
Bromoform
1.29 µg/L
No EPA limit set
1/88 SYR4 2012–2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbon TetrachlorideChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneEthylbenzeneFluorideGlyphosateGross Alpha, Excl. Radon And UHfpo-DaMercuryNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
HENRYETTA
Phone
918-652-3348
Email
[email protected]

Frequently asked questions about Henryetta Municipal Authority

Is Henryetta Municipal Authority tap water safe to drink?

EPA monitoring detected 18 contaminants in Henryetta Municipal Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Henryetta Municipal Authority's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Henryetta Municipal Authority serve?

Henryetta Municipal Authority reports serving 6,096 people in Oklahoma, per its EPA record.

Has Henryetta Municipal Authority had any water quality violations?

The EPA has 815 violations on file for Henryetta Municipal Authority, of which 778 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.