← Oklahoma

Tap water quality report

Okmulgee Pwa

EPA monitoring tested this supplier for 87 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

87
contaminants tested
16
detected
13,495
people served
983
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Okmulgee

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

983
health-based violations
1,326
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-09-01 → 2024-09-30
TT Health-based Resolved 2024-09-01 → 2024-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
161.05 µg/L 201%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 220 µg/L
140/140 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
102.6 µg/L 171%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 130 µg/L
138/140 SYR4 2012–2019
Bromodichloromethane
29.625 µg/L
No EPA limit set
worst single sample: 34.6 µg/L
108/108 SYR4 2012–2019
Chloroform
128.25 µg/L
No EPA limit set
worst single sample: 185 µg/L
108/108 SYR4 2012–2019
Dibromochloromethane
9.776 µg/L
No EPA limit set
worst single sample: 15.1 µg/L
107/108 SYR4 2012–2019
Dichloroacetic Acid
54.81 µg/L
No EPA limit set
worst single sample: 73.6 µg/L
104/105 SYR4 2013–2019
Trichloroacetic Acid
47.06 µg/L
No EPA limit set
worst single sample: 60.6 µg/L
104/105 SYR4 2013–2019
Copper
302.85 µg/L 23%
of the EPA limit 1300 µg/L
worst single sample: 986 µg/L
82/91 SYR4 2012–2018
Dibromoacetic Acid
2.346 µg/L
No EPA limit set
worst single sample: 2.99 µg/L
45/105 SYR4 2013–2019
Monochloroacetic Acid
12.476 µg/L
No EPA limit set
worst single sample: 18.2 µg/L
30/105 SYR4 2013–2019
Lead
0.0031 mg/L 21%
of the EPA limit 0.0150 mg/L
19/19 LCR 2025
Lead
14.475 µg/L 97%
of the EPA limit 15 µg/L
worst single sample: 14.8 µg/L
6/91 SYR4 2012–2018
Bromoform
1.239 µg/L
No EPA limit set
worst single sample: 1.3 µg/L
3/108 SYR4 2012–2019
Monobromoacetic Acid
1.779 µg/L
No EPA limit set
worst single sample: 1.78 µg/L
3/105 SYR4 2013–2019
Barium
26 µg/L 1.3%
of the EPA limit 2000 µg/L
1/1 SYR4 2015
Gross Beta Particle Activity
1.15 pCi/L
No EPA limit set
1/1 SYR4 2018
71 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbon TetrachlorideChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneEthylene DibromideEthylbenzeneFluorideGlyphosateGross Alpha, Excl. Radon And UHfpo-DaMercuryNetfosaaNfdhaNmefosaaNitrateNitrate-NitriteNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
OKMULGEE
Phone
918-758-1101
Email
[email protected]

Frequently asked questions about Okmulgee Pwa

Is Okmulgee Pwa tap water safe to drink?

EPA monitoring detected 16 contaminants in Okmulgee Pwa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Okmulgee Pwa's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Okmulgee Pwa serve?

Okmulgee Pwa reports serving 13,495 people in Oklahoma, per its EPA record.

Has Okmulgee Pwa had any water quality violations?

The EPA has 1326 violations on file for Okmulgee Pwa, of which 983 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.