← Oklahoma

Tap water quality report

Snyder Public Works Authority

EPA monitoring tested this supplier for 53 contaminants and detected 25. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

53
contaminants tested
25
detected
1,509
people served
800
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Kiowa

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

800
health-based violations
1,196
violations on file
11
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chlorite
602 µg/L 60%
of the EPA limit 1000 µg/L
worst single sample: 903 µg/L
81/273 SYR4 2012–2019
Bromoform
76.95 µg/L
No EPA limit set
worst single sample: 100 µg/L
59/66 SYR4 2012–2019
Dibromochloromethane
83.675 µg/L
No EPA limit set
worst single sample: 149 µg/L
58/66 SYR4 2012–2019
Bromodichloromethane
57.225 µg/L
No EPA limit set
worst single sample: 65.6 µg/L
56/66 SYR4 2012–2019
Chloroform
49.595 µg/L
No EPA limit set
worst single sample: 65.9 µg/L
54/66 SYR4 2012–2019
TTHM
220.76 µg/L 276%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 320.1 µg/L
53/53 SYR4 2012–2019
Dibromoacetic Acid
29.65 µg/L
No EPA limit set
worst single sample: 31.3 µg/L
51/52 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
69.9 µg/L 117%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 80.2 µg/L
51/52 SYR4 2012–2019
Nitrate-Nitrite
7290 µg/L 73%
of the EPA limit 10000 µg/L
worst single sample: 10900 µg/L
40/42 SYR4 2012–2019
Dichloroacetic Acid
29.095 µg/L
No EPA limit set
worst single sample: 33.1 µg/L
38/51 SYR4 2012–2019
Monobromoacetic Acid
25.85 µg/L
No EPA limit set
worst single sample: 28.6 µg/L
31/52 SYR4 2012–2019
Copper
649.4 µg/L 50%
of the EPA limit 1300 µg/L
worst single sample: 1190 µg/L
29/29 SYR4 2013–2019
Trichloroacetic Acid
20.5 µg/L
No EPA limit set
worst single sample: 23.5 µg/L
27/52 SYR4 2012–2019
Combined Uranium
8.415 µg/L 28%
of the EPA limit 30 µg/L
worst single sample: 8.59 µg/L
15/16 SYR4 2012–2019
Lead
0.0052 mg/L 35%
of the EPA limit 0.0150 mg/L
14/14 LCR 2025
Gross Beta Particle Activity
12.485 pCi/L
No EPA limit set
worst single sample: 13.2 pCi/L
12/17 SYR4 2012–2019
Lead
17.74 µg/L 118%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 24.5 µg/L
9/28 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
7.249 pCi/L 48%
of the EPA limit 15 pCi/L
worst single sample: 9.07 pCi/L
7/17 SYR4 2012–2019
Combined Radium (-226 And -228)
0.6590 pCi/L 13%
of the EPA limit 5 pCi/L
worst single sample: 0.6760 pCi/L
5/16 SYR4 2012–2019
Tetrachloroethylene
0.7640 µg/L 15%
of the EPA limit 5 µg/L
worst single sample: 0.7700 µg/L
5/28 SYR4 2012–2019
Monochloroacetic Acid
9.49 µg/L
No EPA limit set
worst single sample: 9.7 µg/L
4/52 SYR4 2012–2019
Barium
107.8 µg/L 5.4%
of the EPA limit 2000 µg/L
worst single sample: 109 µg/L
2/2 SYR4 2012–2019
Fluoride
297 µg/L 7.4%
of the EPA limit 4000 µg/L
worst single sample: 300 µg/L
2/2 SYR4 2012–2019
Arsenic
2.4 µg/L 24%
of the EPA limit 10 µg/L
1/2 SYR4 2012–2018
Selenium
18.5 µg/L 37%
of the EPA limit 50 µg/L
1/2 SYR4 2012–2019
28 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4-DAntimony, TotalBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneGlyphosateMercuryStyreneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SNYDER PUBLIC WORKS AUTHORITY
Phone
580-569-2119
Email
[email protected]

Frequently asked questions about Snyder Public Works Authority

Is Snyder Public Works Authority tap water safe to drink?

EPA monitoring detected 25 contaminants in Snyder Public Works Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Snyder Public Works Authority's water?

EPA monitoring detected Chlorite, Bromoform, Dibromochloromethane, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Snyder Public Works Authority serve?

Snyder Public Works Authority reports serving 1,509 people in Oklahoma, per its EPA record.

Has Snyder Public Works Authority had any water quality violations?

The EPA has 1196 violations on file for Snyder Public Works Authority, of which 800 are health-based (a contaminant limit or required treatment was breached) and 11 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.