Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2021-10-26 |
| Other | Monitoring | Resolved | 2021-10-26 |
| Other | Monitoring | Unaddressed | 2021-01-04 |
| Other | Monitoring | Unaddressed | 2020-01-21 |
| Other | Monitoring | Unaddressed | 2018-11-08 |
| MR | Monitoring | Resolved | 2015-04-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2015-04-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2015-04-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2015-04-01 → 2015-06-30 |
| Other | Monitoring | Resolved | 2012-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 69.76 µg/L 5.4% of the EPA limit 1300 µg/L
worst single sample: 410 µg/L | 75/86 | SYR4 | 2014–2019 |
| Bromodichloromethane | 13.19 µg/L No EPA limit set
worst single sample: 16 µg/L | 63/63 | SYR4 | 2012–2019 |
| Chloroform | 72.29 µg/L No EPA limit set
worst single sample: 84.5 µg/L | 63/63 | SYR4 | 2012–2019 |
| TTHM | 83.95 µg/L 105% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 87.3 µg/L | 63/63 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 40.8 µg/L No EPA limit set
worst single sample: 48.4 µg/L | 61/61 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 52 µg/L 87% of the EPA limit 60 µg/L
worst single sample: 59.98 µg/L | 61/61 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8.422 µg/L No EPA limit set
worst single sample: 9.1 µg/L | 53/61 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 6.99 µg/L No EPA limit set
worst single sample: 15.5 µg/L | 31/61 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 29/29 | LCR | 2025 |
| Dibromochloromethane | 3.9405 µg/L No EPA limit set
worst single sample: 4.45 µg/L | 28/63 | SYR4 | 2012–2019 |
| Lead | 26.91 µg/L 179% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 30 µg/L | 7/85 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1.88 µg/L No EPA limit set
worst single sample: 1.99 µg/L | 5/61 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.819 µg/L No EPA limit set
worst single sample: 3.93 µg/L | 4/61 | SYR4 | 2012–2019 |
27 contaminants tested, none detected
Utility contact
Frequently asked questions about Canfield City
Is Canfield City tap water safe to drink?
EPA monitoring detected 17 contaminants in Canfield City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Canfield City's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Canfield City serve?
Canfield City reports serving 7,706 people in Ohio, per its EPA record.
Has Canfield City had any water quality violations?
The EPA has 32 violations on file for Canfield City, of which 0 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.