Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2004-04-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2004-04-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2004-04-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2004-04-01 → 2005-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2670 µg/L 27% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| TTHM | 33 µg/L 41% of the EPA limit 80 µg/L
worst single sample: 40 µg/L | 11/14 | SYR4 | 2012–2019 |
| Combined Uranium | 4.64 µg/L 15% of the EPA limit 30 µg/L
worst single sample: 5 µg/L | 10/12 | SYR4 | 2012–2019 |
| Chloroform | 27.75 µg/L No EPA limit set
worst single sample: 33 µg/L | 8/12 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.095 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 8/12 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 8.56 pCi/L 57% of the EPA limit 15 pCi/L
worst single sample: 10.1 pCi/L | 8/10 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.94 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 7/12 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1687 µg/L 17% of the EPA limit 10000 µg/L
worst single sample: 2020 µg/L | 7/7 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 9.63 µg/L 16% of the EPA limit 60 µg/L
worst single sample: 12 µg/L | 7/14 | SYR4 | 2012–2019 |
| Bromoform | 2.25 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 6/12 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 9.275 µg/L No EPA limit set
worst single sample: 11 µg/L | 6/12 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 6.8835 pCi/L No EPA limit set
worst single sample: 7.05 pCi/L | 4/8 | SYR4 | 2012–2019 |
| Barium | 80.65 µg/L 4% of the EPA limit 2000 µg/L
worst single sample: 81 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 587.5 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 600 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.4 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Somers Chase Water Works Corp
Is Somers Chase Water Works Corp tap water safe to drink?
EPA monitoring detected 17 contaminants in Somers Chase Water Works Corp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Somers Chase Water Works Corp's water?
EPA monitoring detected Nitrate, Lead, TTHM, Combined Uranium, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Somers Chase Water Works Corp serve?
Somers Chase Water Works Corp reports serving 224 people in New York, per its EPA record.
Has Somers Chase Water Works Corp had any water quality violations?
The EPA has 4 violations on file for Somers Chase Water Works Corp, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.