← New York

Tap water quality report

Franklin Square Wd

EPA monitoring tested this supplier for 112 contaminants and detected 22. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

112
contaminants tested
22
detected
20,000
people served
15
health-based violations
Water source
Ground water
Ownership
Mixed public/private
Counties served
Nassau

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

15
health-based violations
127
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2015-08-01 → 2015-08-31
MCL Health-based Resolved 2015-08-01 → 2015-08-31
MCL Health-based Resolved 2015-08-01 → 2015-08-31
MCL Health-based Resolved 2015-08-01 → 2015-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2006-11-01 → 2006-11-30
MCL Health-based Resolved 2006-11-01 → 2006-11-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Trichloroethylene
19 µg/L 380%
of the EPA limit, at the 95th percentile of samples — 5 µg/L
worst single sample: 20 µg/L
215/511 SYR4 2012–2019
1,1-Dichloroethylene
2.6 µg/L 37%
of the EPA limit 7 µg/L
worst single sample: 3 µg/L
203/594 SYR4 2012–2019
1,1,1-Trichloroethane
1.619 µg/L 0.8%
of the EPA limit 200 µg/L
worst single sample: 1.94 µg/L
132/594 SYR4 2012–2019
Nitrate
2300 µg/L 23%
of the EPA limit 10000 µg/L
worst single sample: 2500 µg/L
84/102 SYR4 2012–2019
Nitrate-Nitrite
2138 µg/L 21%
of the EPA limit 10000 µg/L
worst single sample: 2280 µg/L
27/33 SYR4 2012–2017
Copper
212.5 µg/L 16%
of the EPA limit 1300 µg/L
worst single sample: 310 µg/L
26/48 SYR4 2012–2019
Tetrachloroethylene
0.6480 µg/L 13%
of the EPA limit 5 µg/L
worst single sample: 0.7000 µg/L
14/593 SYR4 2012–2019
Lead
5.94 µg/L 40%
of the EPA limit 15 µg/L
worst single sample: 6.3 µg/L
13/48 SYR4 2012–2019
Combined Uranium
0.8100 µg/L 2.7%
of the EPA limit 30 µg/L
worst single sample: 0.9000 µg/L
11/11 SYR4 2013–2017
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
9/9 LCR 2023
Barium
2.62 µg/L 0.1%
of the EPA limit 2000 µg/L
worst single sample: 2.7 µg/L
5/50 SYR4 2012–2019
Selenium
2.84 µg/L 5.7%
of the EPA limit 50 µg/L
worst single sample: 2.9 µg/L
5/49 SYR4 2012–2019
Gross Beta Particle Activity
2.221 pCi/L
No EPA limit set
worst single sample: 2.32 pCi/L
4/4 SYR4 2017
Dibromochloromethane
8.23 µg/L
No EPA limit set
worst single sample: 9 µg/L
3/208 SYR4 2012–2019
TTHM
23.59 µg/L 29%
of the EPA limit 80 µg/L
worst single sample: 25.8 µg/L
3/186 SYR4 2012–2019
Bromodichloromethane
5.8405 µg/L
No EPA limit set
worst single sample: 6.1 µg/L
2/209 SYR4 2012–2019
Bromoform
6.405 µg/L
No EPA limit set
worst single sample: 6.7 µg/L
2/209 SYR4 2012–2019
Chloroform
3.931 µg/L
No EPA limit set
worst single sample: 4.1 µg/L
2/209 SYR4 2012–2019
Combined Radium (-226 And -228)
1.324 pCi/L 26%
of the EPA limit 5 pCi/L
worst single sample: 1.33 pCi/L
2/11 SYR4 2013–2017
Beryllium, Total
0.3500 µg/L 8.8%
of the EPA limit 4 µg/L
1/50 SYR4 2012–2019
Gross Alpha, Excl. Radon And U
0.9700 pCi/L 6.5%
of the EPA limit 15 pCi/L
1/9 SYR4 2013–2017
Mercury
0.2000 µg/L 10%
of the EPA limit 2 µg/L
1/50 SYR4 2012–2019
90 contaminants tested, none detected
1,1,2-Trichloroethane1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDichloroacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
HUGHES, JOHN
Phone
516-354-0780
Email
[email protected]

Frequently asked questions about Franklin Square Wd

Is Franklin Square Wd tap water safe to drink?

EPA monitoring detected 22 contaminants in Franklin Square Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Franklin Square Wd's water?

EPA monitoring detected Trichloroethylene, 1,1-Dichloroethylene, 1,1,1-Trichloroethane, Nitrate, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.

How many people does Franklin Square Wd serve?

Franklin Square Wd reports serving 20,000 people in New York, per its EPA record.

Has Franklin Square Wd had any water quality violations?

The EPA has 127 violations on file for Franklin Square Wd, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.