Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2003-04-01 → 2004-06-30 |
| MCL | Health-based | Resolved | 2003-04-01 → 2004-06-30 |
| MCL | Health-based | Resolved | 2003-04-01 → 2004-06-30 |
| MCL | Health-based | Resolved | 2003-04-01 → 2004-06-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-06-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-06-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-06-30 |
| MR | Monitoring | Resolved | 2018-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2018-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2018-01-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 8460 µg/L 85% of the EPA limit 10000 µg/L
worst single sample: 9400 µg/L | 66/66 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 6267 µg/L 63% of the EPA limit 10000 µg/L
worst single sample: 6800 µg/L | 23/23 | SYR4 | 2014–2019 |
| Lead | 0.0017 mg/L 12% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2017 |
| Bromodichloromethane | 1.5 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.014 µg/L No EPA limit set
worst single sample: 2.06 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 4.97 µg/L 6.2% of the EPA limit 80 µg/L
worst single sample: 5.11 µg/L | 3/3 | SYR4 | 2013–2019 |
| Barium | 66.4 µg/L 3.3% of the EPA limit 2000 µg/L
worst single sample: 68 µg/L | 2/2 | SYR4 | 2014–2017 |
| Chloroform | 1.975 µg/L No EPA limit set
worst single sample: 2.01 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.3545 µg/L No EPA limit set
worst single sample: 1.39 µg/L | 2/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.0645 µg/L 3.4% of the EPA limit 60 µg/L
worst single sample: 2.1 µg/L | 2/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 0.9700 pCi/L 19% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2017 |
| Dibromoacetic Acid | 0.5000 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 3.61 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
| Monobromoacetic Acid | 0.8700 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Marybell Homes
Is Marybell Homes tap water safe to drink?
EPA monitoring detected 14 contaminants in Marybell Homes's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Marybell Homes's water?
EPA monitoring detected Nitrate, Nitrate-Nitrite, Lead, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Marybell Homes serve?
Marybell Homes reports serving 355 people in Massachusetts, per its EPA record.
Has Marybell Homes had any water quality violations?
The EPA has 163 violations on file for Marybell Homes, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.