Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2006-01-01 |
| TT | Health-based | Resolved | 2006-01-01 |
| TT | Health-based | Resolved | 1996-03-01 |
| TT | Health-based | Resolved | 1996-03-01 |
| TT | Health-based | Resolved | 1996-03-01 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| MR | Monitoring | Resolved | 2012-01-01 → 2012-12-31 |
| MR | Monitoring | Resolved | 2012-01-01 → 2012-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 603 µg/L 6% of the EPA limit 10000 µg/L | 14/20 | SYR4 | 2012–2019 |
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Barium | 95.98 µg/L 4.8% of the EPA limit 2000 µg/L
worst single sample: 100 µg/L | 3/4 | SYR4 | 2012–2017 |
| Antimony, Total | 0.4000 µg/L 6.7% of the EPA limit 6 µg/L | 1/4 | SYR4 | 2012–2017 |
| Arsenic | 5 µg/L 50% of the EPA limit 10 µg/L | 1/4 | SYR4 | 2012–2017 |
| Beryllium, Total | 0.3000 µg/L 7.5% of the EPA limit 4 µg/L | 1/4 | SYR4 | 2012–2017 |
| Bromodichloromethane | 1.5 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2019 |
| Copper | 20 µg/L 1.5% of the EPA limit 1300 µg/L | 1/2 | SYR4 | 2015–2016 |
| Cyanide | 10 µg/L 5% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2012–2017 |
| Cadmium | 1 µg/L 20% of the EPA limit 5 µg/L | 1/4 | SYR4 | 2012–2017 |
| Chloroform | 1.6 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2019 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 1/4 | SYR4 | 2012–2017 |
| Dibromochloromethane | 1.3 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2019 |
| Fluoride | 100 µg/L 2.5% of the EPA limit 4000 µg/L | 1/4 | SYR4 | 2012–2017 |
| Gross Beta Particle Activity | 1.04 pCi/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L | 1/2 | SYR4 | 2015–2016 |
| Mercury | 0.4000 µg/L 20% of the EPA limit 2 µg/L | 1/4 | SYR4 | 2012–2017 |
| Monochloroacetic Acid | 3.4 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2019 |
| Selenium | 2 µg/L 4% of the EPA limit 50 µg/L | 1/4 | SYR4 | 2012–2017 |
| TTHM | 4.4 µg/L 5.5% of the EPA limit 80 µg/L | 1/3 | SYR4 | 2014–2019 |
| Thallium, Total | 0.3000 µg/L 15% of the EPA limit 2 µg/L | 1/4 | SYR4 | 2012–2017 |
52 contaminants tested, none detected
Utility contact
Frequently asked questions about Chatham Village
Is Chatham Village tap water safe to drink?
EPA monitoring detected 21 contaminants in Chatham Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chatham Village's water?
EPA monitoring detected Nitrate, Lead, Barium, Antimony, Total, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Chatham Village serve?
Chatham Village reports serving 2,156 people in New York, per its EPA record.
Has Chatham Village had any water quality violations?
The EPA has 24 violations on file for Chatham Village, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.