Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2023-10-01 |
| Other | Monitoring | Resolved | 2023-10-01 |
| Other | Monitoring | Resolved | 2023-07-01 |
| Other | Monitoring | Resolved | 2023-07-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2018-08-01 → 2019-07-31 |
| MR | Monitoring | Resolved | 2018-08-01 → 2019-07-31 |
| MR | Monitoring | Resolved | 2018-08-01 → 2019-07-31 |
| MR | Monitoring | Resolved | 2018-08-01 → 2019-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0044 mg/L 29% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Copper | 461.3 µg/L 35% of the EPA limit 1300 µg/L
worst single sample: 525 µg/L | 15/15 | SYR4 | 2013–2019 |
| Lead | 5.31 µg/L 35% of the EPA limit 15 µg/L
worst single sample: 10 µg/L | 15/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 5.97 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 12/12 | SYR4 | 2014–2019 |
| Bromoform | 17.415 µg/L No EPA limit set
worst single sample: 20 µg/L | 12/12 | SYR4 | 2014–2019 |
| Chloroform | 2.745 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 3.8845 µg/L No EPA limit set
worst single sample: 4.11 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dibromochloromethane | 11.45 µg/L No EPA limit set
worst single sample: 12 µg/L | 12/12 | SYR4 | 2014–2019 |
| TTHM | 32.45 µg/L 41% of the EPA limit 80 µg/L
worst single sample: 33 µg/L | 12/12 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 4.798 µg/L 8% of the EPA limit 60 µg/L
worst single sample: 5.04 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 0.6370 µg/L No EPA limit set
worst single sample: 0.6400 µg/L | 2/12 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 0.5595 µg/L No EPA limit set
worst single sample: 0.5600 µg/L | 2/12 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 0.5285 µg/L No EPA limit set
worst single sample: 0.5300 µg/L | 2/12 | SYR4 | 2014–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Cape May Point Boro Wate
Is Cape May Point Boro Wate tap water safe to drink?
EPA monitoring detected 13 contaminants in Cape May Point Boro Wate's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cape May Point Boro Wate's water?
EPA monitoring detected Lead, Copper, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Cape May Point Boro Wate serve?
Cape May Point Boro Wate reports serving 4,000 people in New Jersey, per its EPA record.
Has Cape May Point Boro Wate had any water quality violations?
The EPA has 42 violations on file for Cape May Point Boro Wate, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.