Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 129.515 µg/L 162% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 149 µg/L | 52/52 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 94.45 µg/L 157% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 143.3 µg/L | 52/52 | SYR4 | 2012–2019 |
| Chloroform | 113.4 µg/L No EPA limit set
worst single sample: 122 µg/L | 47/47 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 26.19 µg/L No EPA limit set
worst single sample: 44.8 µg/L | 47/47 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 55.075 µg/L No EPA limit set
worst single sample: 93.6 µg/L | 46/47 | SYR4 | 2013–2019 |
| Bromodichloromethane | 9.905 µg/L No EPA limit set
worst single sample: 12 µg/L | 40/47 | SYR4 | 2013–2019 |
| Copper | 246.5 µg/L 19% of the EPA limit 1300 µg/L
worst single sample: 265 µg/L | 26/31 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.86 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 14/47 | SYR4 | 2013–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2023 |
| Lead | 5.8 µg/L 39% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 3/31 | SYR4 | 2012–2018 |
| Fluoride | 190 µg/L 4.8% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 9.79 pCi/L No EPA limit set | 1/1 | SYR4 | 2013 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Brandywine Bay
Is Brandywine Bay tap water safe to drink?
EPA monitoring detected 12 contaminants in Brandywine Bay's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brandywine Bay's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Dichloroacetic Acid, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Brandywine Bay serve?
Brandywine Bay reports serving 2,245 people in North Carolina, per its EPA record.
Has Brandywine Bay had any water quality violations?
The EPA has 159 violations on file for Brandywine Bay, of which 50 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.