Tap WaterIndex

← North Carolina

Tap water quality report

Whitehurst Mhp

EPA monitoring tested this supplier for 78 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

78
contaminants tested
17
detected
688
people served
2
health-based violations
North Carolina rankingsLead in North CarolinaPFAS in North Carolina
Water source
Ground water
Ownership
Private
Counties served
Cabarrus

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
382
violations on file
12
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
130 µg/L 10%
of the EPA limit 1300 µg/L
worst single sample: 542 µg/L
101/189 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 12/12 LCR 2025
Combined Radium (-226 And -228)
3.5135 pCi/L 70%
of the EPA limit 5 pCi/L
worst single sample: 3.77 pCi/L
10/12 SYR4 2012–2019
Dibromochloromethane
3.42 µg/L
No EPA limit set
worst single sample: 3.9 µg/L
9/13 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
10.588 pCi/L 71%
of the EPA limit 15 pCi/L
worst single sample: 11.1 pCi/L
9/12 SYR4 2012–2019
TTHM
6.42 µg/L 8%
of the EPA limit 80 µg/L
worst single sample: 6.5 µg/L
9/13 SYR4 2013–2019
Gross Beta Particle Activity
9.79 pCi/L
No EPA limit set
worst single sample: 10 pCi/L
7/12 SYR4 2012–2019
Bromoform
3.5 µg/L
No EPA limit set
worst single sample: 3.8 µg/L
5/13 SYR4 2013–2019
Lead
4.1 µg/L 27%
of the EPA limit 15 µg/L
worst single sample: 4.3 µg/L
5/189 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
4.76 µg/L 7.9%
of the EPA limit 60 µg/L
worst single sample: 4.84 µg/L
5/13 SYR4 2013–2019
Combined Uranium
0.6766 µg/L 2.3%
of the EPA limit 30 µg/L
worst single sample: 0.6870 µg/L
4/12 SYR4 2012–2019
Dibromoacetic Acid
1.3 µg/L
No EPA limit set
 3/13 SYR4 2013–2019
Fluoride
366 µg/L 9.2%
of the EPA limit 4000 µg/L
worst single sample: 370 µg/L
3/3 SYR4 2012–2019
Bromodichloromethane
1.357 µg/L
No EPA limit set
worst single sample: 1.36 µg/L
2/13 SYR4 2013–2019
Monochloroacetic Acid
4.82 µg/L
No EPA limit set
worst single sample: 4.84 µg/L
2/13 SYR4 2013–2019
Barium
76 µg/L 3.8%
of the EPA limit 2000 µg/L
 1/3 SYR4 2012–2019
Dichloromethane
1 µg/L 20%
of the EPA limit 5 µg/L
 1/10 SYR4 2013–2019
61 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformChromiumDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitrateOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
REYES-PALACIOS, MARIXA
Phone
704-786-2315
Email
[email protected]

Frequently asked questions about Whitehurst Mhp

Is Whitehurst Mhp tap water safe to drink?

EPA monitoring detected 17 contaminants in Whitehurst Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Whitehurst Mhp's water?

EPA monitoring detected Copper, Lead, Combined Radium (-226 And -228), Dibromochloromethane, Gross Alpha, Excl. Radon And U, and others. The full list with the level and data source for each is above.

How many people does Whitehurst Mhp serve?

Whitehurst Mhp reports serving 688 people in North Carolina, per its EPA record.

Has Whitehurst Mhp had any water quality violations?

The EPA has 382 violations on file for Whitehurst Mhp, of which 2 are health-based (a contaminant limit or required treatment was breached) and 12 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.